Wellbore Size Effect and Borehole Instability Response Characteristics of Fractured Sandstone in SP Gas Storage
The SP Gas Storage is situated in the SP-Xingcheng structural belt, where volcanic gas reservoirs are widely distributed and characterized by abundant primary microfractures and pore structures. The developed pores and fractures degrade the petrophysical properties of reservoirs and render volcanic basement rocks highly abrasive. In addition, pore-fracture systems alter the internal stress field of formations, which substantially increases the risk of wellbore instability and the collapse of injection and production wells. This poses great challenges to drilling operations and the safe running of the gas storage in this block. To systematically clarify the wellbore instability mechanism of large-diameter wellbores and address the drilling engineering problems in the study area, a dedicated experimental scheme for large-diameter wellbore stability was designed in this work. Laboratory true triaxial tests were conducted on wellbore stability with different borehole sizes, and basic mechanical parameter tests of reservoir rocks were also completed. This study systematically investigates the evolution of rock mechanical parameters and the surrounding stress-reconstruction mechanism induced by pore-forming unloading and identifies the dominant internal mechanism of wellbore instability under large-diameter conditions. A clear distinction is made between the formation stress redistribution caused by stratum exposure and unloading during drilling and formation stress evolution during the subsequent injection and production of the gas storage. On this basis, the fracture initiation threshold, propagation paths, and morphological evolution in thin interbedded sandstone–mudstone reservoirs are further analyzed. Combined with rock mechanical parameters and in situ stress balance conditions, criteria and quantitative evaluation methods for wellbore instability discrimination are finally established.