Pumped storage hydropower (PSH) is a key regulating resource for renewable energy integration and power system stability. Due to frequent start-stop operations, deep peak-load regulation, and bidirectional operating conditions, stator winding insulation degradation, rotor inter-turn short circuits, and end-winding vibration have become the dominant failure modes of pumped storage units. Conventional monitoring systems are limited by single-source sensing, asynchronous data acquisition, high misdiagnosis rates, and maintenance decisions that rely heavily on expert experience, making traditional periodic maintenance increasingly inadequate. To address these challenges, this study proposes an intelligent diagnosis and decision support system based on multi-source data fusion and hybrid intelligent algorithms. An Intelligent Electronic Device (IED)-based condition monitoring platform is developed by integrating multiple sensing technologies. Complete Variational Mode Decomposition (CVMD) and Kernel Principal Component Analysis (KPCA) are employed to extract representative features from multi-physical-field data, while an attention-enhanced Long Short-Term Memory (LSTM) network is introduced for accurate fault identification. In addition, adaptive time-alignment and joint denoising algorithms are developed to improve data quality and diagnostic robustness. A predictive maintenance framework incorporating health assessment and remaining useful life prediction is further established to optimize maintenance scheduling. Results demonstrate that the proposed system achieves a fault prediction accuracy of over 90% and reduces annual maintenance costs by approximately 15–20%. The proposed framework provides an effective solution for intelligent operation and maintenance of modern pumped storage units.
Xuan Liu, Jie Bai, Bingjie Dou et al.· Processes· 0 citations
With the increasing integration of distributed photovoltaics, energy storage systems, electric vehicle chargers, and intelligent terminals, accurate identification of heterogeneous edge-end devices in distribution networks has become challenging due to their diverse operating characteristics and similar current signatures. This paper proposes an identification method based on current time–frequency features and Random Forest. Equivalent grid-connected current models are developed for five types of edge-end devices, considering different capacity levels, operating states, ripple characteristics, and transient behaviors. A 13-dimensional feature set is extracted from time-domain, frequency-domain, and time–frequency characteristics, covering 11 device subclasses. Feature analysis is conducted to evaluate the separability of the extracted features, and Random Forest is employed for multi-class device identification. The results show that the proposed method achieves an overall accuracy above 98% on independent test samples and 96.91% in the IEEE 33-bus validation case, demonstrating its effectiveness for distribution-network edge-end device identification.
Hui Fan, Jie Zhao, Zhao Zhao et al.· Electronics· 0 citations