Instability Mechanism of a Soil–Rock Binary-Structure Slope Under Rainfall Conditions
Rainfall-induced instability of highway slopes with a soil–rock binary structure may be strongly influenced by the hydraulic barrier effect of low-permeability shale. This study investigated the right-side slope along the D-ramp section from DK0+230 to DK0+660 at Deze Interchange on the Zhanhui Expressway, China. A two-dimensional coupled seepage–stress model was developed based on the engineering geological conditions and rainfall records to simulate the slope response under a 72 h extreme rainfall scenario with an intensity of 175.6 mm/d. Field displacement monitoring data were used to validate the modeled deformation pattern under natural conditions. Under natural conditions, the reinforced toe zone remained stable, deformation was concentrated along the interface between the block-stone layer and strongly weathered limestone in the middle and rear portions of the slope, and the factor of safety was 1.1344, indicating a basically stable state. During prolonged rainfall, infiltrating water accumulated near the interface between the strongly weathered shale and the underlying shale owing to the hydraulic barrier effect of the low-permeability shale, forming a continuous transient saturated zone. The plastic zone progressively extended from the upper shallow weak interface to the lower deep interface and eventually became fully connected, while the factor of safety decreased to 0.9886, indicating overall instability. The results reveal a coupled mechanism involving interfacial water accumulation, increased pore-water pressure, the formation of a transient saturated zone, and a shift in the controlling zone of slope deformation and failure from shallow to deeper layers. These findings provide a reference for disaster prevention and mitigation of similar soil–rock binary-structure slopes.