Similar papers
Oct 2026
Semi-analytical modeling of cutting forces in precision turning considering size effects
In precision turning, the cutting thickness is comparable to or even smaller than the tool edge radius, where the size effect caused by the tool edge radius significantly influences the cutting force. Addressing the issue that existing precision cutting force models often overlook the influence of tool geometry on th...
Xiao-Hong Lu, Shan-Hong Xiao, Jia-Sheng Li et al.
· Proceedings of the Instituti... · 0 citations
Open access
Oct 2026
A pseudo-three-dimensional work-balance correction for sidewall friction effects in centrifuge slope models
Centrifuge model tests are widely used to investigate slope stability; however, frictional interactions between the sliding mass and rigid container sidewalls introduce boundary effects that compromise similitude with ideal plane-strain prototypes. These effects can lead to an apparent increase in the stability of...
Fang Liu, Li-Jun Sun, Yue Wang
· Scientific Reports · 0 citations
Open access
Oct 2026
Restoring Force Model for Cross-Slanted Corrugated Steel Plate Shear Walls
To establish the restoring force model of the cross-slanted self-buckling-restrained corrugated steel plate shear wall (hereafter abbreviated as CCSPW), finite element parametric analysis was conducted on the hysteretic behavior of the CCSPW by considering four key influencing factors: the axial compression ratio, aspe...
Tao-Chun Yang, Hao-Fan Liu, Xiu-Yong Liu et al.
· Applied Sciences · 0 citations
Aug 2026
Crystallographic Orientation and Tool Geometry Coupled Model for Brittle-Ductile Transition Prediction
The brittle–ductile transition depth is a key parameter for understanding material removal mechanisms and achieving damage-free surfaces in the machining of brittle single crystals. However, existing predictive models often neglect crystallographic anisotropy and the scale-dependent effects associated with the tool e...
Tianxiao Chang, Zhi-Wei Zhu, Hong Yang et al.
· Journal of manufacturing sci... · 0 citations
Sep 2026
Two-dimensional partial-slip contact analysis for a nano-flat punch accounting for surface effects
This work investigates a Cattaneo–Mindlin partial-slip contact model considering surface effects based on energy density theory, loaded by a two-dimensional rigid flat punch bonded to a homogeneous elastic half-space. A partial-slip contact model is established based on the Airy function and Chen–Yao theory. Using the...
Li-Yuan Wang, Yu-Heng Xu, Zhi-Ying Ou
· Mathematics and mechanics of... · 0 citations
Open access
Sep 2026
EVALUATION OF HYDROSTATIC PRESSURE IN EQUAL CHANNEL ANGULAR PRESSING CONSIDERING CHANNEL GEOMETRY AND FRICTION MODEL
The relevance of this work stems from the substantial potential of Equal-Channel Angular Pressing (ECAP) for producing unique material structures, which necessitates a comprehensive understanding of the influence of all process parameters. Hydrostatic pressure is a key factor governing microstructure evolution during s...
A. Gangalo, Svetlana V. Miroshnichenko
· Vestnik of Kuzbass State Tec... · 0 citations