Skip to content

Similar papers

Open access Sep 2026

Hot Deformation Behavior and Hot Processing Map Analysis of Q420DR Low-Temperature Pressure Vessel Steel

Nominally isothermal compression tests were performed on Q420DR low-temperature pressure-vessel steel at 900–1150 °C and strain rates of 0.05–10 s−1, with a target true strain of 0.7. The effects of temperature and strain rate on flow behavior were investigated. Flow stress increased with decreasing temperature and inc...

Xian-Peng Zhao, Chang-Lin Liu, Yuan Gao et al. · 0 citations
Open access Sep 2026

Hot-Deformation Mechanical Properties and Dynamic Recrystallization Behavior of 12Cr2Mo1V Steel

This study investigates the hot-deformation behavior and dynamic recrystallization (DRX) kinetics of 12Cr2Mo1V steel for heavy forgings of large hydrogenation reactors. Gleeble isothermal compression tests were performed at 950–1200 °C and strain rates of 0.01–5 s−1 with friction correction to obtain reliable flow–stre...

Ru-Xing Shi, Ming Yang, Ji-Yao Liu et al. · 0 citations
Open access Sep 2026

Hot Deformation Behavior and Microstructure Evolution of GTD222 Nickel-Based Superalloy

Hot workability of GTD222 nickel-based superalloy was examined by isothermal compression over 1010–1090 °C and 0.01–10 s−1 to a true strain of 1.2. The flow resistance increased as the temperature decreased or the strain rate increased. The measured curves were corrected for interfacial friction and adiabatic heating b...

Zhi-Heng Zhu, Chun-Hua Xiang, Guang-Yu Wang et al. · 0 citations
Open access Sep 2026

Hot Deformation Behavior, Constitutive Model, and Processing Map of 022Cr12Ni10MoTi Alloy

This study investigates the hot deformation behavior of 022Cr12Ni10MoTi alloy over a wide range of strain rates and temperatures. Hot compression experiments were carried out at deformation temperatures ranging from 900 °C to 1200 °C and strain rates varying from 0.01 s−1 to 10 s−1. The microstructure and flow stress o...

Xiu-Xuan Yang, Wan-Hua Chen, Chang-Jun Wang et al. · 0 citations
Open access Sep 2026

Hot Deformation Behaviour of Q690 High-Strength Steel

This study systematically investigated the thermal deformation characteristics of industrial-grade Q690 HSLA steel under different temperatures and strain rates through isothermal compression tests conducted on the Gleeble-3500 simulator. The flow stress of Q690 steel exhibits significant sensitivity to deformation par...

Hai-Wen Liu, Yang Yuan, Li-Feng Fan et al. · 0 citations

We use cookies to run the site and, with your consent, for analytics and to show ads. See our Cookie Policy.