Skip to content
Open access

Seismic Performance Evaluation of Mid-Rise RC Buildings Considering Soil–Structure Interaction and Foundation Effects

Sep 2026 · Wasit Journal of Engineering Sciences · 0 citations · 11 references

Abstract

This study evaluates the seismic performance of an existing seven-story reinforced concrete parking garage (85 m × 50 m plan) that was not originally designed for seismic loads. The structure, featuring flat slabs, ordinary shear walls, and a circular vehicular ramp, is currently supported on bearing piles. Three-dimensional finite-element time-history analyses were conducted in Plaxis 3D using the local Halabja 2017 Mw 7.3 acceleration record. Parametric investigations compared the existing pile system against alternative raft foundations with plan dimensions of 1.1B, 1.5B, and 2B, where B = 50 m on both the actual four-layer site soil and an idealized soft-soil profile; a fourteen-story variant was also analyzed to examine height effects. Results show that the 14-story model on soft soil with the smallest raft (1.1B) exhibited the most critical response: roof displacement reached 26.5 cm, inter-storey drift peaked at 1.61 %, and the fundamental period lengthened to 2.46 s. Conversely, increasing the raft size to 2B reduced displacement and drift toward the fixed-base values (e.g., 7-storey site-soil displacement dropped from 7.0 cm.at 1.1B to 6.8 cm at 2B versus 6.5 cm fixed-base). Base shear followed an inverse trend, decreasing with soil flexibility but recovering toward the fixed-base level as raft stiffness increased. It is recommended that raft foundations be sized at least 1.5B–2B for mid-rise RC structures on deformable soils to limit SSI-induced period lengthening and drift amplification; explicit 3D SSI analysis should be mandated for seismic assessment of existing non-seismic buildings in seismically active regions such as Iraq.

Read PDF

Similar papers

Open access 2026

Enhancing the seismic performance of plan irregular L-shaped reinforced concrete buildings using steel bracing systems

Seismic retrofitting of existing reinforced concrete (RC) buildings is often required because of deficiencies in their original design, changes in seismic provisions, or increased functional demands. This study evaluates the effectiveness of steel bracing for improving the seismic performance of a ten-story, plan-irreg...

H. Jarrahi, Abbas Sadeghi, S. Vaziri · 0 citations
Open access Sep 2026

Comparative Seismic and Cost Analysis of OMRF and Shear Wall Systems for a 15-Story RC Building in Jeddah

Objectives: The objective of the study was to compare and contrast the seismic performance and material-based construction cost of two reinforced concrete structural systems of the 15-story building in Jeddah, Saudi Arabia, namely the Ordinary Moment Resisting Frame system and the reinforced concrete shear wall system....

Samer Salah Sewedan · 0 citations

We use cookies to run the site and, with your consent, for analytics and to show ads. See our Cookie Policy.