Aug 2026· Italian National Conference on Sensors· Vol 26· 0 citations· 33 references
Medicine
TL;DR
A receiver deployment optimization method that ensures robust localization performance under Direction of Arrival (DoA) estimation errors arising in practical environments and remains robust against increasing DoA estimation errors is proposed.
Abstract
In this paper, we propose a receiver deployment optimization method that ensures robust localization performance under Direction of Arrival (DoA) estimation errors arising in practical environments. The proposed method accounts for DoA estimation errors and optimizes receiver deployments by incorporating Position Dilution of Precision (PDoP) to mitigate their amplification into localization errors. To accurately characterize DoA estimation errors under realistic propagation and installation constraints, a ray-tracing-based Wireless InSite simulator is employed to model environments including actual terrain and buildings. Based on this model, a cost function incorporating both the DoA estimation errors at each receiver and the PDoP is defined, and a Genetic Algorithm (GA) is applied to minimize this cost function and determine the optimal receiver deployment. The optimal deployment achieves low localization RMSE and maintains high robustness against environmental and system uncertainties, particularly when the standard deviation of the DoA estimation error exceeds approximately 8°. These results demonstrate that the proposed deployment method provides reliable localization performance in realistic propagation environments and remains robust against increasing DoA estimation errors.
This paper proposes an undifferenced, uncombined centralized RTK positioning framework that maximizes the benefits from using multiple reference stations and produces an optimal positioning solution under Gaussian noise with correctly-specified error covariances.
This paper studies the effect of Reconfigurable Intelligent Surface (RIS) placement errors on optimal RIS deployment for Time-of-Flight (ToF)-based self-localization. We consider a setup in which a source transmits a signal, receives the RIS-reflected echo, and estimates its own position from the corresponding ToF meas...
Mahdi Koloushani, Omid Rezaei, S. M. Karbasi et al.· 0 citations
In this study, an interactive simulation framework was developed to analyze the behavior of Received Signal Strength Indicator (RSSI) values in LoRa-based communication links. This Python-based framework was specifically designed to model a two-dimensional space containing fixed LoRa nodes, mobile targets, and multiple...
Emre Erkan· Balkan Journal of Electrical...· 0 citations
The transition to 6G-and-beyond wireless systems with large-scale antenna arrays and high-frequency deployments significantly extends the near-field region, where channels exhibit a strong dependence on user location. While this enables location-based beam focusing as a low-overhead alternative to conventional channel...
Nima Mozaffarikhosravi, Amirhossein Azarbahram, P. Dharmawansa et al.· 0 citations
Accurate time difference of arrival (TDOA) localization depends on reliable measurements. In cluttered indoor and urban environments, non-line-of-sight (NLOS) propagation is common. It introduces positive excess delays and biases TDOA observations. This letter studies receiver subset selection for TDOA localization und...
This paper investigates the optimal sensor configuration problem for bearings-only target localization. A unified analytical model for localization accuracy is established, applicable to both 2D and 3D spaces. Using A-optimality as the performance metric, an eigenvalue analysis of the Fisher information matrix (FIM) re...
Xiang-Zhi Cheng, Xi-Xiang Liu, Kun Liu et al.· IEEE Signal Processing Lette...· 0 citations
We use cookies to run the site and, with your consent, for analytics and to show ads.
See our Cookie Policy.