Skip to content
Open access

Nanofiber-coated natural fibers for mechanical and durability improvement of sustainable cementitious systems

Sep 2026 · RSC Advances · Vol 16, pp. 52875-52891 · 0 citations · 20 references
Medicine

Abstract

A hybrid reinforcement system based on rhubarb fiber (RF) and dendritic fibrous nanosilica (DFNS) was developed and incorporated into foamed concrete to examine its influence on structural performance. The study focuses on both mechanical properties and durability under impact loading as well as chemically aggressive exposure conditions. Rhubarb fiber, a sustainable cellulose rich material, was chemically modified using NaOH treatment and subsequently functionalized with DFNS to enhance its interfacial bonding and dispersion within the cement matrix. Structural and chemical transformations of the modified fiber were characterized using TGA, FTIR, and SEM analyses. The experimental findings indicate that incorporating the RF/DFNS hybrid reinforcement markedly enhances the impact resistance and energy dissipation capacity of the composite, improves its resistance to crack propagation, increases thermal stability, and effectively reduces shrinkage related deterioration. Furthermore, the synergistic effects of the bio based fiber and nanostructured DFNS contribute to enhanced impact resistance and extended service life of foamed concrete, promoting an eco friendly approach to advanced construction material design. These findings highlight the promise of integrating natural fibers with nanomaterials to develop sustainable, high performance cementitious systems. The hybrid reinforcement system enhanced both the mechanical strength and durability of the foamed concrete. In addition, the incorporation of bio based rhubarb fibers provides a potential pathway toward more sustainable reinforcement strategies, particularly through the use of renewable lignocellulosic resources. However, the overall environmental benefits of the RF/DFNS system require further verification through quantitative life cycle assessment.

Read PDF

Similar papers

Oct 2026

Effects of Reinforcements on the Viscoelastic Behavior of PETG Composites for Marine Structure

This research examines viscoelastic, mechanical and environmental performance of additively manufactured PETG-based composites as possible marine engineering products. PETG was strengthened with short carbon fibre (SCF), glass fibre (GF), graphene nanoplatelets (GNP), carbon nanotubes (CNT), CaCO3, wood flour, and hybr...

T. K. Gupta, Vijay Chaudhary, Aravindan Munusamy Kalidhas et al. · 0 citations
Open access Oct 2026

Pullout Behavior and Interfacial Properties of Cementitious Composites with Graphene Oxide-Treated Polymer Fibers

Poor fiber–matrix interfacial adhesion limits the mechanical performance of synthetic fiber-reinforced cementitious composites. To overcome this limitation, this study investigates the impact of surface-treating polypropylene (PP) macrofibers with graphene oxide (GO) on single-fiber pullout behavior. The thermal and st...

V. Cecconello, R. Serafini, M. Poletto · 0 citations
Open access Oct 2026

Physicochemical and Mechanical Characterization of PLA Composites With Waste‐Derived Reinforcements for 3D ‐Printed Applications

This study focuses on developing sustainable polylactic acid (PLA)‐based composites reinforced with recyclable fillers, such as sawdust, medium‐density fibreboard (MDF), and textile waste, for advanced 3D printing applications. Following circular economy principles, this study looks to enhance the mechanical, structu...

Adriana Popa, G. Ispas, Victor Dan Baias et al. · 0 citations
Oct 2026

Interfacial engineering, processing, and microstructure relationships in PLA/Diss fiber biocomposites for improved mechanical performance

This study reports the development of fully bio-based polylactic acid (PLA) biocomposites reinforced with short Ampelodesmos mauritanicus (Diss) fibers using a powder-based processing route. To improve fiber-matrix compatibility, the fibers were subjected to sequential HCl/NaOH treatment to modify their surface mor...

Abdelouahab Ait-Kaci, M. Hannachi, M. Nechiche et al. · 0 citations
Sep 2026

Improving the Durability and Interfacial Reinforcement of Basalt Fibers by Coating with Graphene Oxide to Improve the Stability of Concrete in Frozen Soil with Saline

Concrete in frozen saline soil regions are highly vulnerable to coupled deterioration caused by chloride attack and freeze-thaw cycles, which imposes increasingly requirements on its durability. Although basalt fiber (BF) can effectively reinforce cementitious materials, its smooth and chemically inert surface weaken...

Hong-Yan Zeng, Yu-Hui Wang, Shen Qu et al. · 0 citations

We use cookies to run the site and, with your consent, for analytics and to show ads. See our Cookie Policy.