Numerical results show that the derived costs closely match Monte Carlo simulations, the KF accurately tracks the ground-truth plant-state trajectory, and the proposed methods consistently outperform the zero-forcing benchmark, confirming the benefit of balancing communication-control interference, especially with limited spatial degrees of freedom (DoFs).
Abstract
A joint communication and control (JCC) framework is proposed, where a base station (BS) simultaneously serves multiple communication users (CUs) and controls a physical plant in a closed loop. In the downlink, BS-generated control inputs are transmitted to and recovered at the plant, with wireless actuation distortion incorporated into the plant-state evolution. In the uplink, the plant state is reported to the BS and tracked by a Kalman filter (KF) for subsequent control-input generation. To characterize long-term control performance under communication-control interference, finite- and infinite-horizon linear quadratic Gaussian (LQG) costs are derived, directly linking beamforming design to plant-state evolution. JCC beamforming problems are then formulated for vector- and scalar-valued control inputs to minimize the infinite-horizon LQG cost subject to per-user communication signal-to-interference-plus-noise ratio (SINR) requirements. For the vector case, a second-order cone programming (SOCP)-based successive convex approximation method is developed for the resulting nonconvex problem. For the scalar case, a closed-form infinite-horizon LQG cost is derived, and the communication-control Pareto boundary is optimally characterized by an SOCP-based bisection method. Its optimality follows from the strict monotonicity of the scalar control cost with respect to the control SINR. Numerical results show that the derived costs closely match Monte Carlo simulations, the KF accurately tracks the ground-truth plant-state trajectory, and the proposed methods consistently outperform the zero-forcing benchmark. This confirms the benefit of balancing communication-control interference, especially with limited spatial degrees of freedom (DoFs).
Wireless networked control systems (WNCSs) have emerged as a key enabler for modern industrial automation, interconnecting sensors, control centers, and actuators via wireless communications. However, conventional architectures based on separate optimization of control and communication lead to inefficient resource uti...
Yong-Zhi Yi, Shi-Yi Gu, Lei Feng et al.· IEEE International Symposium...· 0 citations
Simulations show that the effective SINR of OTFS changes 37.8% less per frame than that of orthogonal frequency division multiplexing (OFDM) at 70 m/s under the same numerology, and that the waveform contribution to the usefulness of stale SINR feedback increases with mobility.
T. Van Le, Luong Cong Nguyen, Trong-Dai Hoang et al.· 0 citations
Numerical results demonstrate that the proposed waveform design converges quickly, satisfies the sensing requirement, and achieves communication performance close to a communication-only benchmark with improved user fairness.
Quang-Truong Can, Le-Nam Tran, M. Nguyen et al.· IEEE Open Journal of the Com...· 0 citations
We study a dynamic integrated sensing-and-communication problem in which a multi-antenna transmitter communicates with a receiver while simultaneously tracking a moving target governed by a stable Gauss--Markov model. We formulate the sensing--communication trade-off as a rate--distortion problem, where the communicati...
Mohammadreza Bakhshizadeh Mohajer, Luca Barletta, Alex R. Dytso et al.· 0 citations
This paper investigates a measurement-driven rotary-wing unmanned aerial vehicle (UAV)-enabled wireless communication system serving multiple ground users. Unlike conventional studies relying on simplified theoretical channel models, we derive the air-to-ground (A2G) path loss and shadow-fading models from software-def...
Shu-Tong Wang, Zhen-Chen Liu, Fu-Yuan Ma et al.· Drones· 0 citations
This paper investigates a wireless networked control system where a base station (BS) controller coordinates multiple nonlinear dynamic subsystems over wireless fading channels. In the considered setup, sensors first upload state observations to the BS, which then processes the received information to generate control...
Yi-Yang Li, Zhi-Qing Wei, Zhi-Yong Feng et al.· IEEE Transactions on Network...· 0 citations
We use cookies to run the site and, with your consent, for analytics and to show ads.
See our Cookie Policy.