Skip to content
Open access

Performance enhancement of 6g millimeter wave links via RIS beamforming and CDL-based channel modeling

Sep 2026 · PLoS ONE · Vol 21 · 0 citations · 36 references
Medicine

TL;DR

This paper discusses how using realistic cluster-delayed-line (CDL) channel modelling can improve the performance of RIS-assisted millimeter-wave communication links and shows that RIS-assisted beamforming greatly improves communication performance from direct established links.

Abstract

Communication using millimeter waves offer large bandwidth, become one of the key components of future sixth-generation wireless (6G) network. However, high levels of path loss and blockage limit the reliability of these types of links and communication, especially in non-line-of-sight (NLOS) scenarios. Recently, a novel technology known as reconfigurable intelligent surfaces (RIS) has been developed to help reconfigure the wireless propagation environment through programmable electromagnetic reflection. This paper discusses how using realistic cluster-delayed-line (CDL) channel modelling can improve the performance of RIS-assisted millimeter-wave communication links. A cascaded base station (BS)-RIS-user equipment (UE) system using a propagation channel that has been modelled according to mobile radio channel characteristics from the 3GPP Technical Report (38.901) was simulated at a frequency of 28 GHz in order to study the multipath clustering, angular dispersion and delay spread effects that take place when propagating signals using a wireless or radio channel. An iterative RIS phase optimization algorithm was developed for maximizing the coherent signal power obtained by combining all of the reflected signals based on the available directional antennas operated by RIS hardware. We present performance evaluations of the RIS-assisted channel compared to performance evaluations of traditional direct based channel configurations of identical communications facilities based on analysis of communications efficiency, signal-to-noise ratio, coverage probability, energy efficiency and accuracy of localization. The results show that RIS-assisted beamforming greatly improves communication performance from direct established links. For instance, when using 200 RIS elements, spectral efficiency of communication increases from approximately 2 bps/Hz to greater than 8 bps/Hz and the SNR at the receiver will have improved by almost 40 dB when using RIS technology compared to direct-established links.

Read PDF

Similar papers

Open access 2026

Statistical Path Loss Modeling of LoS–NLoS Transitions for mmWave Communications in Urban Environments

The rapid evolution towards Sixth Generation (6G) wireless systems demands seamless connectivity, ultra-high data rates, and stringent quality-of-service requirements, particularly in dense urban environments. To meet these stringent requirements, Millimeter-Wave (mmWave) communications have emerged as a key enabler, l...

Inam Ullah, Hesham El Sayed, Alexis A. Dowhuszko et al. · 0 citations
Open access 2026

Ris-enhanced 6g mmwave communications: Capacity analysis and optimization

The advent of 6G mobile networks promises unprecedented data rates, ultra-low latency, and massive connectivity. However, the utilization of millimeter-wave (mmWave) frequencies, such as 28 GHz, introduces significant challenges regarding path loss and signal blockage. Reconfigurable Intelligent Surfaces (RIS) have eme...

Filip Radenovic · 0 citations
Open access 2026

Millimeter-Wave OSDM Underwater Acoustic Communication With Large-Scale Array

Millimeter-wave (mmWave) communication is a newly-emerging technique for terrestrial 5G wireless systems. By shifting to the mmWave frequency band, a much larger bandwidth can be achieved. The resulting high-frequency transmission loss can be mitigated with the aid of a large-scale array (LSA) and angular processing. A...

Yu-Jie Wang, Yan-Bin He, Qun-Fei Zhang et al. · 0 citations
Open access 2026

Performance Evaluation of mmWave and Sub-THz Frequencies in 6G Mobile Communications

—Mobile data demand is growing rapidly, creating a need for ultra-high-speed wireless connectivity. To address this, researchers are exploring millimeter-wave (mmWave) and sub-terahertz (sub-THz) frequency bands for 5G and future 6G systems. While 5G networks continue to roll out globally, their gigabit-level speeds ma...

Luan Ruҫi, Olimpjon Shurdi, Algenti Lala · 0 citations

Millimeter-Wave Integrated Antenna Systems for 6G Wireless Communications

Future communication networks are expected to support extremely high data rates, enabling new services such as dense wireless connectivity, high-capacity backhaul links, and short-range sensing and communication. To achieve this, wireless systems are moving toward millimeter-wave frequency bands, where abundant spectru...

Viktor S. Chernikov · 0 citations
Book Open access Oct 2026

Demo: Frequency-Shifting RIS for Multi-User mmWave OFDMA

Millimeter-wave (mmWave) networks suffer from two practical limitations: blockage often leaves clients in non-line-of-sight (NLoS) conditions, and client radios support much smaller instantaneous bandwidth than a base station. We demonstrate Mirage, a custom space-time-coded reconfigurable intelligent surface (RIS) tha...

Aadesh Madnaik, Karthikeyan Sundaresan · 0 citations

We use cookies to run the site and, with your consent, for analytics and to show ads. See our Cookie Policy.