10CrNi5MoV high-strength steel may suffer from microbiologically influenced corrosion (MIC) caused by sulfate-reducing bacteria (SRB), posing a severe threat to structural integrity and service safety. Herein, we report the application of immersion corrosion tests, electrochemical measurements, and X-ray photoelectron spectroscopy to investigate the MIC behavior of 10CrNi5MoV in simulated SRB-inoculated seawater. This class of medium-alloy steel is susceptible to MIC, with its corrosion rate reaching ∼0.03 mm y-1 after 21 days of immersion, which is nearly threefold of that under sterile conditions. Electrochemical measurements reveal that SRB notably elevate the corrosion current density and simultaneously reduce the charge transfer resistance, indicating greatly accelerated interfacial corrosion kinetics. Meanwhile, the corrosion morphology transformed from uniform corrosion to severe pitting corrosion, with the average pit depth reaching ∼20 μm after 21 days of immersion. This study supports that SRB-induced MIC follows the cathodic depolarization mechanism, and Ni enrichment in the inner rust layer may mitigate MIC. These findings provide theoretical and experimental references for MIC risk evaluation and management of this steel in marine environments.
Pure CO₂ is non-corrosive, but it can become corrosive in humid environments, thereby threatening pipeline integrity. This study focused on L360Q steel and conducted high-pressure static corrosion simulation experiments in a supercritical CO₂ environment at 40°C and 14 MPa. Using the weight loss method in conjunction w...
To address the corrosion issue of reinforcing steel in seawater–sea-sand concrete (SWSSC), specimens embedded with HRB400 carbon steel bars and 304 stainless steel bars were prepared with a fixed dosage of nano-silica (NS). A 150-day full-immersion test in artificial seawater was conducted, and the corrosion performanc...
Shao-Ning Wang, Yu Li, Xin-Xin Cao et al.· Coatings· 0 citations
Preventing ammonium salt corrosion is a key problem for ensuring the stable operation of continuous production, which is of great importance for the chemical industry. This study examines the ambient-temperature corrosion of Q345 steel with NH4Cl solution (with concentrations of 0.01, 1, and saturated mol/L over 200, 5...
Jing-Hui Men· Journal of Physics, Conferen...· 0 citations
Low-temperature plasma nitriding of austenitic stainless steels produces an expanded austenite (γN) layer that enhances surface hardness but may generate high residual stress and cracking, compromising corrosion resistance. This work evaluates the influence of nitrogen flow duty cycle on the corrosion resistance of AIS...
A. Vianna, O. P. Calabokis, Y. E. Núñez de la Rosa et al.· Coatings· 0 citations
With prolonged oilfield development and the shift toward enhanced oil recovery techniques, downhole corrosion has become increasingly severe in wells. As a more cost-effective corrosion control technology, tungsten alloy electroplating technology (TAET) has attracted more and more attentions, which can form a dense c...
K. Sun, C. Hong, Z. Zhong et al.· GOTECH· 0 citations
We use cookies to run the site and, with your consent, for analytics and to show ads.
See our Cookie Policy.