Transfer Learning-Enabled Distortion Compensation for Amplitude-Phase-Time Block Modulation-Based Nonlinear Single-Carrier Wireless Communications
TL;DR
This work proposes a transfer-learning-enabled, fully digital transceiver-cooperative method for amplitude-phase-time block modulation (APTBM)-based nonlinear single-carrier transmission under adjacent channel leakage ratio (ACLR) constraints, which significantly reduces online training time and computational overhead.
Abstract
Power amplifier (PA) nonlinearity and memory effects significantly limit the spectral compliance, reliability, and energy efficiency of communication systems. To address this, we propose a transfer-learning-enabled, fully digital transceiver-cooperative method for amplitude-phase-time block modulation (APTBM)-based nonlinear single-carrier transmission under adjacent channel leakage ratio (ACLR) constraints. At the transmitter, iterative clipping and filtering (ICAF) and static digital pre-distortion (SDPD) act jointly to reduce signal peaks and suppress spectral regrowth without requiring wideband feedback. At the receiver, the inherent amplitude-phase constraints of APTBM provide weakly supervised prior knowledge for offline inverse-model pretraining, which is followed by the online few-shot adaptation of a lightweight digital post-distortion (DPoD) network. Subsequently, a cascaded DPoD and clipping-noise cancellation scheme systematically compensates for residual distortions induced by both the PA and ICAF. Simulation and measurement results demonstrate reliable transmission at an input back-off of approximately 2 dB under a 30-dBc ACLR constraint. Furthermore, the proposed DPoD approach significantly reduces online training time and computational overhead, delivering a performance gain of over 2 dB compared to conventional learning-based DPoD schemes.