The sustainable reuse of mine tailings as engineered backfill offers a potential strategy for simultaneously addressing mining-waste management and underground instability in historical urban mining districts. This study evaluates the geomechanical response of shallow underground galleries beneath Zaruma, Ecuador, by integrating geological, geotechnical, hydrogeological, geophysical, underground-mapping, and laboratory data within a 3D geometry-informed, two-dimensional finite-element framework under pseudo-static loading. Cemented tailings properties were derived from experimental programs using locally generated mine residues. Unsupported galleries developed pronounced stress concentrations, with maximum principal stresses of approximately 86.5 MPa and localized numerical total displacements approaching 4 m. Under the modeled complete-filling and full-contact condition, maximum principal stresses decreased to approximately 10 MPa, accompanied by marked reductions in displacement concentration and yielding. These results demonstrate an improvement in the modeled underground geomechanical response but do not quantify field-scale subsidence or sinkhole probability. The fully contacted configuration represents a favorable upper-bound stabilization condition. Beyond the Zaruma case, the study provides a transferable framework for critically evaluating cemented mine-tailings backfill in shallow, irregular urban underground workings.
Abstract Subsidence in abandoned mines presents significant geotechnical and environmental risks, threatening infrastructure, ecosystems, and human safety, often decades after mining activities have ceased due to the gradual collapse or deformation of underground voids. This process can result in structural damage, soi...
Historical underground voids and surface excavation can affect the three-dimensional response of open-pit slopes. This study applies geological modeling and an elasto-damage constitutive model to the east slope of the Nanfen open-pit mine. UAV photogrammetry and geological exploration data represent the topography, lit...
Hua Li, Rui-Jie Gong, Shi-Hui Jiao et al.· Frontiers in Earth Science· 0 citations
This paper addresses the critical issue of high metal intensity and corrosion degradation in underground mine support systems by introducing an alternative non-metallic solution. The research proposes a low-metal-intensity combined dual-level rock bolting system where traditional steel SVP-19 profiles and retaining p...
V. Ruskykh, O. Haidai, I. Filippov et al.· E3S Web of Conferences· 0 citations
The majority of the waste generated from opencast mining, termed as overburden (OB), is dumped adjacent to the mine boundary and poses long-term stability issues. Various studies have been carried out to assess the risk of dump slope failure, and treatment strategies have been accordingly recommended to strengthen this...
A. Gautam, L. Yadu· Journal of Sustainable Minin...· 0 citations
Abstract The conversion of exhausted sand and gravel quarries into artificial lakes represents an increasingly adopted post-mining land-use strategy, particularly in alluvial environments where excavations intersect shallow groundwater systems. However, the long-term stability of quarry slopes under changing hydrogeolo...
Robert Guzranyi, M. Toderaș, Gelu Madear et al.· Mining Revue· 0 citations
We use cookies to run the site and, with your consent, for analytics and to show ads.
See our Cookie Policy.