Effect of annealing on the microstructure and properties of selective laser melted Al₁.₈CrCuFeNi₂ high-entropy alloy

Unveiling the Effect of Annealing Temperature on the Phase Transformations of Inconel 718 Super alloy Manufactured by Additive Manufacturing

The Effects of Rapid Solidification on the Microstructure and Mechanical Properties of Al5083

Effects of heat treatment process regulation on mechanical properties and microstructure of laser powder bed fusion 316H stainless steel

316H stainless steel fabricated by laser powder bed fusion (LPBF) usually exhibits high strength but limited ductility due to the rapid solidification characteristics and heterogeneous as-built microstructure. In this work, the effects of solution heat treatment on the tensile properties, phase constitution, and micros...

Influence of Heat-Treatment Temperature on Microstructure and Mechanical Properties of Selective-Laser-Melted GH3536 Superalloy

For laser additive manufacturing components, subsequent heat treatment is crucial for regulating the material microstructure and properties. This paper investigates the evolution of microstructure and precipitates in GH3536 nickel-based superalloy fabricated by selective laser melting (SLM), subjected to heat treatment...

Influence Of Heat Treatment On The Properties Of A Ti6Al4V-10wt%WC Metal Matrix Composite Fabricated Using Selective Laser Melting

A Ti6Al4V-10wt%WC metal matrix composite was fabricated with selective laser melting using optimal parameters of 960 mm|s laser scan speed and 200 W laser power. Cuboids and tensile test samples were printed using a continuous alternating meander scanning pattern. Ti6Al4V samples were printed for comparison purposes. B...

Heat Treatment Effects on Microstructure, Hardness & Corrosion of Al-12Si-Cu Alloy