2026· MATEC Web of Conferences· Vol 424, pp. 03012· 0 citations· 10 references
TL;DR
Optimized asynchronous FIFO structures can improve reliability, maintain efficient logic resource utilization, and support stable data buffering in cross-clock-domain systems.
Abstract
Asynchronous First-In First-Out (FIFO) buffers are widely used for reliable data transfer across different clock domains in globally asynchronous, locally synchronous (GALS) systems and System-on-Chip (SoC) systems. They play an important role in network communication, image processing, and other high-speed digital systems. This paper reviews the basic architecture of asynchronous FIFOs and analyzes the key challenges associated with empty/full detection and metastability in cross-clock-domain transmission. Conventional status detection methods are discussed, with particular attention to the limitations caused by pointer comparison errors, synchronization delay, and metastable states. Furthermore, several optimization techniques are summarized, including Gray-code read/write pointers, multi-stage synchronizers, and near-empty/near-full warning flags. Gray-code pointers reduce the risk of multi-bit transition errors, while three-stage synchronization improves the reliability of pointer transfer between clock domains. The introduction of warning flags further enhances the flexibility of FIFO status monitoring without significantly increasing hardware overhead. Based on these analyses, optimized asynchronous FIFO structures can improve reliability, maintain efficient logic resource utilization, and support stable data buffering in cross-clock-domain systems. Future development is expected to focus on lower power consumption, reduced structural complexity, improved encoding methods, and broader adaptability to high-performance SoC applications.
Results show that the proposed FIFO correctly performs read and write operations, preserves data integrity, and generates accurate full and empty flags under normal and boundary conditions, and is suitable for reliable communication between independent clock domains in digital systems.
With the rapid advancement of modern Very Large Scale Integration (VLSI), the increasing complexity of System-on-Chip (SoC) designs has made traditional single-clock domain synchronous architectures insufficient for meeting the escalating demands of high-performance computing and high-bandwidth communication. As a resu...
Asynchronous First-In First-Out (FIFO) buffers are widely used in multi-clock digital systems to enable reliable data transfer across independent clock domains. Conventional asynchronous FIFO designs mainly focus on functional correctness and clock domain crossing (CDC) reliability, while power efficiency during idle p...
Yu-Cheng Liu· MATEC Web of Conferences· 0 citations
Metastability still remains one of the most challenging problems in modern digital designs, especially for high-speed and low-latency systems in which we have to deal with multiple clock domain crossings (CDCs). This article presents a methodology to tackle the metastability issue from the design, the layout, and the s...
Sagar Mallik· International Journal of Com...· 0 citations
This paper proposes a real-time distributed control architecture that separates Single Board Computer (SBC)-based high-level control computation from Communication Board microcontroller-based lower-level multi-node communication. Control and feedback main data are exchanged through a Dual-Port RAM (DPRAM)-based shared-...
The architecture introduces two reusable system-level design principles: interrupt-independent notification via sequence counters, avoiding OS-mediated jitter as much as possible, and cache-aware core selection based on the non-uniform cache architecture (NUCA) to reduce the variability of access latency, thereby achie...
Hui-Ji Zheng, Qing Liu, Kang Wang et al.· Electronics· 0 citations
We use cookies to run the site and, with your consent, for analytics and to show ads.
See our Cookie Policy.