Skip to content
Open access

Experimental Study on Gas–Water Two-Phase Seepage Characteristics in a Low-Permeability Gas Reservoir

Sep 2026 · Energies · Vol 19, pp. 4263 · 0 citations · 37 references

Abstract

The relationship between two-phase flow behavior and pore microstructure in low-permeability gas reservoirs remains poorly understood, particularly during gas accumulation (gas displacing water) and subsequent development (water displacing gas). To address this, five plug cores with permeabilities ranging from 0.02 to 20.92 mD were selected from a low-permeability sandstone gas reservoir in the Tarim Oilfield. A comprehensive experimental program was carried out, including pore-throat structure characterization, wettability measurements, and both steady-state and unsteady-state gas–water relative permeability tests. These data were further integrated with capillary pressure curves derived from high-pressure mercury injection, centrifugation, and semipermeable membrane methods, enabling systematic comparison and parametric modeling. The results indicate that the reservoir is generally characterized by low permeability, fine pore throats, and moderate water-wetness, with contact angles between 49° and 60°. As permeability declines, pore-throat dimensions decrease and pore connectivity worsens: the mercury injection saturation median pressure increases from 0.752 to 16.477 MPa, while mercury withdrawal efficiency drops from 78.59% to 40.54%. These trends suggest that finer throats impose greater resistance to nonwetting phase invasion and that the “ink-bottle” effect intensifies fluid entrapment. Relative permeability measurements show that the unsteady-state method is more responsive to gas breakthrough and localized flow channeling, yielding lower endpoint gas relative permeability compared to the steady-state approach. With deteriorating reservoir quality, irreducible water saturation during gas displacement rises from 29.03% to 45.20%, residual gas saturation during water displacement increases from 17.60% to 38.90%, and the two-phase coexisting flow zone narrows markedly from 53.37% to 15.90%. The consistent trends observed between relative permeability and mercury injection data confirm that reduced pore-throat size and heightened capillary resistance not only hinder the formation of continuous nonwetting phase pathways but also promote water retention and gas trapping. Through normalization, representative Corey-type gas–water relative permeability curves were established for the study area (with Corey exponents of 2.393 and 1.534 for the gas and water phases, respectively, under gas-displacing-water conditions), along with Brooks–Corey-type capillary pressure curves (with equivalent displacement pressures ranging from 0.025 to 0.133 MPa). These results provide essential parameters for seepage characterization and numerical simulation of underground gas storage in low-permeability gas reservoirs.

Read PDF

Similar papers

Open access Oct 2026

Hysteresis in Relative Permeability From Cyclic Water-Oil Corefloods

Water injection is a long-standing method for secondary oil recovery, benefiting from favorable water/oil mobility. However, ultimate recovery can be limited by gravity segregation in thick reservoirs, snap-off trapping in water-wet rocks, and low mobility in viscous oil systems. This study investigates relative permea...

Victor Fernandes, H. Abdoulghafour, A. Rezaei et al. · 1 citation
Open access Sep 2026

Investigation of CO2 Displacement Characteristics of Highly Water-Sensitive and Low-Permeability Oil Reservoirs: A Case Study of Block A in Eastern China

Highly water-sensitive, low-permeability reservoirs are difficult to develop by water flooding because clay activation and pore-throat plugging impair injectivity. This study combined X-ray diffraction, scanning electron microscopy, water-sensitivity tests, long-core CO2 flooding, and response surface methodology to in...

Ming-Guo Peng, Wei Cheng, Bin-Bin Zhou et al. · 0 citations
Oct 2026

Pore-Scale Gas Transport in Shale: Effects of Water Distribution and Reservoir Conditions

Shale reservoirs commonly contain a certain level of water saturation, which affects gas transport and well productivity. This study developed a lattice Boltzmann method (LBM) framework for gas transport in water-bearing shale, incorporating a discrete Maxwell (DM) slip boundary condition for gas slippage and a Bosan...

Tao Zhang, Feng Ge, Yun-Ting Fan et al. · 0 citations
Open access 2027

Propagation Laws of the Pressure Disturbance and Mathematical Model of Unstable Seepage in Water-Bearing Tight Sandstone Reservoirs

Due to their complex pore-throat networks, low permeability, and high water saturation, water-bearing tight sandstone reservoirs exhibit pronounced heterogeneity in formation pressure distribution and unclear reserve mobilization patterns. These factors hinder accurate estimation of remaining gas and the design of ba...

Jie Zhang, Zhen-Kai Wu, Fei-Fei Fang et al. · 0 citations
Conference Oct 2026

Study on water-driven pressure injection process for low-permeability reservoirs

Low-permeability reservoirs are characterized by complex pore structures, low permeability, and high threshold pressure gradients, which make conventional waterflooding ineffective, leading to the bottleneck of “water cannot be injected, oil cannot be produced.” Through laboratory experiments, this study investigates t...

T. Zhang · 0 citations
Open access Nov 2026

Pore-Scale Gas–Liquid Two-Phase Flow and Liquid Retention in Rough Pore Throats

CO2 injection offers multiple potential benefits in subsurface energy systems, including enhanced gas recovery, reservoir-pressure maintenance, mitigation of liquid blockage in water-bearing gas reservoirs, and geological storage. However, CO2–liquid two-phase flow in microscale pore throats is strongly affected by sur...

Chao Xu, Yi-Jun Gao, Ping-Hua Shu et al. · 0 citations

We use cookies to run the site and, with your consent, for analytics and to show ads. See our Cookie Policy.