Skip to content

Physics-constrained data-driven prediction and multi-objective optimization of road noise in electric vehicles.

Oct 2026 · ISA transactions · 0 citations · 48 references
Medicine

Abstract

The overall interior noise level of pure electric vehicles is relatively low, making road noise a dominant factor affecting in-cabin ride quality. Mid- and low-frequency structure-borne road noise mainly arises from the coupled vibration of the tire-suspension system and exhibits multiple spectral peaks, strong nonlinearity, and high sensitivity to structural parameters, posing challenges for accurate prediction and optimization. Conventional experimental and simulation-based methods are applicable to road noise analysis but often involve complex modeling procedures and limited efficiency. To address these limitations, innovations are introduced in both model architecture and physical consistency. First, a road-noise prediction model based on a multi-head attention mechanism is proposed. Key structural parameters, including tire properties, suspension bushings, and dampers, are used as inputs, while the multi-head attention structure enhances feature extraction and weight allocation across different frequency bands, thereby improving the representation accuracy and generalization capability for multi-peak and nonlinear road noise. Second, a physics-constrained learning framework is established by embedding amplitude-frequency response constraints into the loss function, ensuring that the learning process follows vibro-acoustic transmission laws. This strategy reduces prediction bias at typical peak frequencies and improves model interpretability. Based on these strategies, a physics-constrained multi-head attention long short-term memory model is constructed and integrated with NSGA-III to achieve multi-objective collaborative optimization of road noise. Full-vehicle road tests are conducted for validation.

View source

Similar papers

2026

Physics-Informed Enhanced TCN-Transformer Hybrid Model for Predicting Moored Vessel Motion Responses

Under environmental loads, moored vessels experience complex six-degree-of-freedom (6-DOF) motions, directly affecting port operation safety and efficiency. Accurate and efficient prediction of vessel motion responses is essential for dynamic assessment and risk early warning. However, the strong nonlinearity, multi-DO...

Wen-Yuan Wang, Jia-Kang Li, Bo-Chi Liu et al. · 0 citations
Open access Sep 2026

A Data-Driven Framework for Planetary Winch Reducer Noise Prediction via Feature Selection and Residual Compensation

Accurate reducer noise prediction is essential for condition monitoring and predictive maintenance of mechanical transmission systems. However, the strong nonlinear coupling between operating conditions and noise responses, together with measurement uncertainties, remains a major challenge for data-driven prediction me...

Yi-Ding Sun, Ling Tang, Yong-Sheng Zhang et al. · 0 citations
Oct 2026

PSO-MAC-Based Optimization of Vibration Sensor Placement for Heavy Vehicle Electromechanical Transmission

In prognostics and health management (PHM) research for heavy vehicle electromechanical transmission (EMT), vibration signal dataset construction faces challenges of poor acquisition quality and low signal-to-noise ratio, leading to difficulties in fault feature extraction and unsatisfactory diagnosis performance. This...

Shu-Feng Lin, Chang-Song Zheng, Cen-Bo Xiong et al. · 0 citations
Open access Aug 2026

Research on AGV Driving Stability from Multi-Modal Crack Perception to Vibration Constraint Speed Decision

Pavement cracks pose significant challenges to the driving stability and operational safety of automated guided vehicles (AGV) in industrial and logistics environments. The complex geometry of cracks and their nonlinear coupling with vehicle dynamics make conventional rule-based or single-modal approaches insufficient...

Peng Chen, Yang Yang, Chang Zhou et al. · 0 citations
Open access Sep 2026

Physics-Informed Feature Analysis and Exploratory Clustering of Electric Vehicle On-Board Charger Behaviour

Electric vehicle (EV) smart charging changes the operating point of the vehicle on-board charger (OBC), so conversion efficiency and grid-side power quality can vary materially with the charging current. This study reanalyses an experimental dataset of 38 EV models represented by 39 test units manufactured between 2011...

Buasa Andy Mayingi, B. Thango, D. Okojie et al. · 0 citations

We use cookies to run the site and, with your consent, for analytics and to show ads. See our Cookie Policy.