SmartBike, a low power Internet-of-Things (IoT) platform for cyclist safety, combining blind spot monitoring, rider usage detection, localization, and wireless edge-to-gateway communication is presented.
Abstract
Urban cycling is a sustainable mode of transportation, but cyclists remain highly vulnerable in dense traffic because of limited situational awareness and the lack of active safety assistance on conventional bicycles. This paper presents SmartBike, a low power Internet-of-Things (IoT) platform for cyclist safety, combining blind spot monitoring, rider usage detection, localization, and wireless edge-to-gateway communication. The proposed system consists of a bike-mounted IoT node and a gateway assisted monitoring interface. The node integrates three time-of-flight sensors for blind spot detection, an IMU module for motion sensing and on-board speed estimation, a GNSS module for localization, and a saddle mounted piezo-electric transducer for event-driven wake up. To satisfy the energy constraints of the IoT node, the design employs piezo-triggered activation, application specific sensing rates, and compact connectionless Bluetooth Low Energy (BLE) advertisements for low overhead transmission. The firmware is implemented in Zephyr RTOS using a lightweight state machine architecture, while the gateway performs passive BLE scanning, payload decoding, and real-time dashboard visualization. The BLE payload is reduced to 11 bytes, and power analysis shows that sensing accounts for more than 90% of the total energy budget, while wireless communication represents less overall consumption. With a 12600 mWh battery, the estimated lifetime reaches approximately 21 months under typical commuting conditions (Average 40 min per day).
This paper presents a low-cost Internet of Things (IoT)-based home automation system developed using an Arduino UNO microcontroller, a Passive Infrared (PIR) motion sensor, and LED indicators to automate lighting control based on human presence detection. The proposed system is designed to enhance energy efficiency by...
Ananya, Rohit, Chandra Kanta Samal et al.· Journal of IoT-based Distrib...· 0 citations
The design and implementation of an Internet of Things (IoT)-based real-time kitchen monitoring and automation system aimed at enhancing safety, efficiency, and intelligent control within kitchen environments is presented.
Simon Usiju Chagwa, P. B. Zirra· Journal of Analytical and Ap...· 0 citations
This study strengthened the automotive relevance by emphasizing how this integrated platform enhances emergency responsiveness, supports predictive maintenance, and offers practical value for EVs, commercial fleet operations, and broader intelligent transportation applications.
B. Jyothi, Bhavana Pabbuleti, Ravi Ponnala et al.· International Journal of Adv...· 0 citations
The design and implementation of a low-cost, Internet of Things IoT-based battery management and monitoring system for electric vehicles that enables real-time monitoring and provides users with accessible information through a mobile application is presented.
Jireh Chukwuma Udeze· International Journal of Eng...· 0 citations
The proposed platform demonstrates the feasibility of combining electric vehicle conversion, connected heart-rate monitoring, and intelligent safety technologies within a single smart mobility framework.
S. Gamal, M. Mousa, Mazen Mortada et al.· Frontiers of Mechanical Engi...· 0 citations
We use cookies to run the site and, with your consent, for analytics and to show ads.
See our Cookie Policy.