Skip to content
Open access

INVESTIGATIONS OF COMBUSTION PROCESSES OF NATURAL GAS-HYDROGEN MIXTURES UNDER OXIDANT BALLASTING WITH COMBUSTION PRODUCTS

Sep 2026 · Vidnovluvana energetika · 0 citations · 9 references

Abstract

The urgency of the decarbonisation challenge calls for the introduction of innovative technologies in the energy sector. One promising approach is to replace natural gas with hydrogen produced by electrolysis of water using energy from renewable sources (so-called “green hydrogen”). How-ever, the addition of hydrogen to natural gas increases the theoretical combustion temperature of the fuel–oxidant mix-ture, which leads to higher nitrogen oxide (NOx) emissions. Experimental results have established the regularities gov-erning the effect of air ballasting in the burner with combus-tion products during the combustion of natural gas and its hydrogen–natural gas mixtures on nitrogen oxide (NOx) and carbon monoxide (CO) emission levels. Flame temperatures were experimentally investigated, and accepta-ble levels of oxidant ballasting were determined while maintaining combustion stability. It was shown that the use of flue gas recirculation during the combustion of natural gas or a natural gas–hydrogen mixture (50%/50% vol. ratio) reduces NOx emissions approximately threefold. The maximum allowable limits of inert (ballast) gas addition ensuring stable combustion and preventing flame blow-off have been determined: up to 20% for natural gas and up to 30% for a mixture containing 50% hydrogen. Under air ballasting conditions, the flame blow-off limit is 25% for natural gas and 31–32% for a 50/50 (vol. %) mixture. Based on chromato-graphic analysis of the combustion products along the flame length, the features of methane conversion into hydrogen and carbon monoxide during partial oxidant dilution with combustion products have been identi-fied.

Read PDF

We use cookies to run the site and, with your consent, for analytics and to show ads. See our Cookie Policy.