Evaluating Corrosion and Wear Resistance of Ni-Fe(Si-Ti)C Nanocomposite Coating

Effect of Current Density on Electrodeposited Ni-TiC-WC Composite Coating and Evaluating the Corrosion Resistance of the Coating and Substrate in NaCl Solution

Wear Properties of Al/MoS 2 Nanocomposite Coatings Generated by Electro-Spark Deposition on the Surface of Ti-6Al-4V Alloy

Influence of Na2MoO4 Additive on the Corrosion Resistance of Micro-Arc Oxidation Coatings on 6061 Aluminum Alloy

Aluminum alloys are indispensable in industrial applications due to their excellent mechanical properties, but they are prone to corrosion in humid environments. Micro-arc oxidation (MAO) technology can form a ceramic-like oxide layer on their surface, significantly enhancing corrosion resistance and other properties....

STUDY OF THE PHYSICOCHEMICAL PROPERTIES OF COATINGS FORMED BY MICRO-ARC OXIDATION ON A TITANIUM ALLOY

This study investigates the physicochemical and mechanical properties of calcium phosphate coatings formed by micro-arc oxidation (MAO) on the titanium alloy Ti-13Nb-13Zr. The coatings were deposited in an electrolyte based on 30% H₃PO₄ with the addition of hydroxyapatite (60 g/L) and CaCO₃ (90 g/L) under various volta...

CORROSION BEHAVIOR OF Ti-6Al-4V PRODUCED BY ADDITIVE MANUFACTURING METHOD

This study investigates the corrosion behavior of Ti-6Al-4V alloys manufactured by the DMLS method and subjected to shot peening using different coverage ratio. The aim of this study was to determine the effect of saturation ratio, a parameter of the shot peening process, on corrosion behavior. After producing Ti alloy...

Influence of Preparation Parameters on Thermal Control and Corrosion Behavior of ZnO Nanoparticle-Incorporated MAO Coatings on Magnesium Alloy

In this study, ZnO nanoparticle-incorporated micro-arc oxidation (MAO) coatings were prepared on AZ31 magnesium alloy in a sodium silicate-based electrolyte. The effects of applied current density (3–6 A·dm−2), oxidation time (3–15 min), ZnO concentration (4–10 g·L−1), pulse frequency (400–700 Hz), and duty cycle (10–4...