Sep 2026· Journal of Physics, Conference Series· Vol 3325, pp. 012012· 0 citations· 11 references
Physics
TL;DR
The results demonstrate that the proposed road roughness estimation method achieves better PSD consistency under the constant-grade condition and provides a more accurate characterization of local roughness-state transitions under varying-grade conditions.
Abstract
Road roughness estimation based on vehicle dynamic responses provides a practical solution for low-cost and online road condition perception. To improve estimation performance under varying road-grade conditions, a road roughness estimation method based on road-grade pre-classification is proposed. Accelerometers are arranged at the vehicle body’s bottom and at each wheel center to measure their vertical accelerations. Short-window statistical features are extracted from these signals to provide local road-grade prior information. A Kalman filtering with an unknown-input scheme is then employed to continuously reconstruct the road excitation. The proposed estimation method is validated through simulation using TruckSim under both constant-grade and varying-grade road conditions. The results demonstrate that the proposed method achieves better PSD consistency under the constant-grade condition and provides a more accurate characterization of local roughness-state transitions under varying-grade conditions.
This work provides a condition-aware and reproducible data-driven methodology for tire–road noise estimation and provides a basis for future large-scale monitoring and data-driven noise analysis applications.
M. Demetgül, M. Heinzelmann, S. Lazarova-Molnar· IEEE Access· 0 citations
In vehicle dynamics, road roughness is a primary dynamic excitation source that induces the vertical dynamic behavior of vehicles. The existing International Organization for Standardization (ISO) 8608 standard classifies road profiles into specific classes by deriving the overall Power Spectral Density (PSD) through t...
Longitudinal speed estimation becomes difficult when a vehicle runs through roads with changing adhesion, because the wheel-speed signals can be strongly affected by slip, wheel lock-up, and short road impacts. This problem is more obvious for four-wheel-drive electric vehicles, where the estimator usually has to work...
Yi-Chao Ye, Zhi-Guo Zhao, Kun Zhao et al.· Proceedings of the Instituti...· 0 citations
Tire–road interaction is increasingly important for situational awareness in autonomous vehicles and advanced driver-assistance systems, as tire deformation contains information that is related to both vehicle kinematics and tire forces. Optical sensing offers a direct means of observing this interaction with minimal i...
Halil Yahya Yeşilyurt, O. Akalin· Italian National Conference...· 0 citations
Accurate estimation of the tire-road friction coefficient (TRFC) is essential for vehicle active safety systems including ABS and ESC. However, purely model-based estimators suffer from response lag during abrupt surface transitions, while purely vision-based estimators are vulnerable to per-frame noise. To address the...
Wan-Tong Li, Yun-Fei Yin, Ming-Wu Li et al.· International Conference on...· 0 citations
We use cookies to run the site and, with your consent, for analytics and to show ads.
See our Cookie Policy.