Skip to content
Open access

Numerical Investigation of MHD‐Driven Heat and Mass Transfer in a Porous Enclosure Filled With Cu–Water Nanofluid

Oct 2026 · Engineering Reports · Vol 8 · 0 citations · 50 references

Abstract

The main objective of this research is to investigate the natural convection and heat transfer characteristics of Cu‐water nanofluid in a porous cavity with circular obstacles. This study examines the combined effects of magnetic damping, porous resistance, buoyancy, nanoparticle‐enhanced transport, obstacle arrangement, and enclosure geometry on heat and mass transfer. The governing nonlinear partial differential equations describing fluid flow and heat–mass transfer are solved using the finite element method (FEM). A detailed parametric analysis is conducted by varying the Darcy number, Rayleigh number, Hartmann number, nanoparticle volume fraction, and aspect ratio, while grid independence is ensured for solution accuracy. The results reveal that increasing the Darcy and Rayleigh numbers significantly enhances fluid circulation and promotes convection‐dominated heat transfer. Lower aspect ratio configurations produce stronger circulation and higher thermal performance compared to higher aspect ratios. The higher Hartmann number strengthens the Lorentz force, weakens fluid circulation, and reduces convective transport. The addition of nanoparticles has a marginal influence on heat transfer, with the average Nusselt number decreasing slightly (approximately 0.04%–0.06%) as the nanoparticle volume fraction increases, while mass transfer exhibits greater sensitivity to nanoparticle loading. This study examines the combined effects of porous permeability, magnetic field strength, cavity geometry, and nanoparticle concentration on coupled heat and mass transfer in an obstructed enclosure.

Read PDF

Similar papers

Open access 2026

Transient MHD nanofluid convection with coupled heat–mass transfer over an inclined porous medium for thermal regulation and material engineering

This study explores the unsteady MHD flow of a reactive, radiative, heat-generating nanofluid past an infinite inclined porous plate, influenced by mixed convection and coupled thermal-solutal diffusion (Soret and Dufour effects). The nanofluid consists of water-based Cu-Ag nanoparticles. The governing non-dimensional...

Arony Lucas, T. I. Chuwa · 0 citations
Open access Feb 2026

Numerical Analysis of MHD Flow and Heat Transfer of Cu–Al₂O₃/Water Nanofluid over a Porous Stretching Surface with Effects of Thermal Radiation, Viscous Dissipation, Heat Generation, and Chemical Reaction

This work explores the impact of thermal radiation and chemical reaction on magnetohydrodynamic (MHD) flow of a hybrid nanofluid over a porous stretching surface. The proposed model incorporates key physical mechanisms, including viscous dissipation, internal heat generation, and resistance due to the porous medium. A...

K. V. Reddy · 0 citations
Open access Sep 2026

Thermodynamic and Heat Transfer Analysis of Mixed Convection Stagnation Point Flow of a Micropolar Fluid Over a Vertical Heated Plate

In this paper, the steady two‐dimensional mixed‐convection stagnation‐point flow of an electrically conducting, incompressible micropolar Eyring–Powell fluid over a vertical heated plate in the presence of a transverse magnetic field, thermal radiation, Joule heating, viscous dissipation, a porous medium, and interna...

Faisal Salah, Hessah Alqhatani, K. K. Viswanathan et al. · 0 citations
Oct 2026

Numerical analysis of melting heat transfer in stratified Casson nanofluid flow over an inclined wedge for energy-efficient thermal systems

The model provides a physically consistent framework for advanced thermal systems and offers useful insights for optimizing heat transfer performance in industrial and biomedical engineering applications.

N. Al-harbi, A. Khan, A. Riasat et al. · 0 citations
Open access Sep 2026

Analysis of Maxwell nanofluid model with convective variations, variable-density and heat generation in a porous medium

This study introduces a novel analysis of Maxwell nanofluid flow over a stretching surface, integrating multiple coupled physical mechanisms previously overlooked in the literature. The comprehensive model incorporates boundary convection, internal heat generation, Ohmic heating, temperature-dependent transport propert...

Mohammed Alrehili · 0 citations
Sep 2026

Numerical analysis of magnetohydrodynamic free convection hybrid nanofluid flow within a porous cavity containing multiple-heated fins using finite difference scheme

Effective thermal management is essential for improving the performance, reliability, and lifespan of advanced thermal systems. The purpose of this study is to computationally investigate how fin location and height affect magnetohydrodynamic free-convection flow and heat transfer in a porous square cavity filled w...

T. K., Yunchang Seol, Hyunju Kim · 0 citations

We use cookies to run the site and, with your consent, for analytics and to show ads. See our Cookie Policy.