System-Level Energy Modeling of Sensing-Dominant LoRa Nodes in ns-3
Abstract
Long Range Wide Area Network simulators provide energy frameworks for protocol-level studies, but they model only the communication subsystem and disregard the energy cost of sensing. This creates a blind spot for deployments where data acquisition dominates the energy budget. We bridge this gap by integrating a system-level energy model into the Network Simulator 3, covering a sensing–communication–sleep cycle. The radio energy model is extended with fixed state-transition overheads derived from empirical current measurements. Separate sensor energy models are developed for different sensor operating characteristics. The extended energy framework is parameterized from sourcemeter traces and validated against multi-cycle measurements, achieving relative error below 3%. Our simulation results show that for a low-power sensor switching from Spreading Factor 12 to Spreading Factor 7 extends lifetime by approximately 77%; for a high-power sensor, the same optimization yields less than 6% improvement. These results demonstrate that communication-level optimizations alone are insufficient for sensing-dominant node deployments.