Balancing Tracking and Stability in High-Dynamic Path-Following of 4WD Autonomous Vehicles via MPC With Dynamic Weighting and Slip-Ratio-Constrained Torque Allocation
Nov 2026· IEEE Transactions on Control Systems Technology· Vol 34, pp. 3185-3199· 0 citations· 42 references
TL;DR
This study presents a path-following control strategy for autonomous four-wheel-drive (4WD) vehicles that emphasizes dynamic weighting to adjust control priorities in real time and maintains stable and feasible tracking by explicitly enforcing slip ratio constraints.
Abstract
In path-following control, the core challenge lies in balancing tracking accuracy and vehicle stability as tire force availability depends on vehicle speed, curvature, and road adhesion conditions. To manage this balance in a more adaptive manner, this study presents a path-following control strategy for autonomous four-wheel-drive (4WD) vehicles. Rather than relying on envelope design or fixed input limits, the proposed approach emphasizes dynamic weighting to adjust control priorities in real time. Inspired by Bryson’s Rule, which scales state errors by their allowable ranges, a real-time adaptive weighting mechanism is developed to adjust model predictive control (MPC) priorities—achieving accurate tracking with minimal control effort during nominal driving and enhancing stability in aggressive maneuvers. A torque allocation module further uses MPC-generated commands to derive real-time slip-ratio bounds, ensuring safe and efficient torque distribution across all wheels. An unscented Kalman filter (UKF) estimates longitudinal and lateral tire forces, providing feedback essential for both adaptive weighting and torque allocation. Simulations conducted in CarSim–Simulink under representative road adhesion conditions ( $\mu = 0.85$ and $\mu = 0.6$ ), as well as under severe friction overestimation, compare variants with and without dynamic weighting and slip ratio constraints, and are further benchmarked against a recent and representative MPC-based approach. In the low-friction ( $\mu = 0.6$ ) scenario, the proposed method reduces peak lateral error by 42.1%, steering effort by 7.2%, and peak slip ratio by 79.2% compared with the benchmark approach. Moreover, under friction-mismatched conditions, the benchmark approach fails to complete the track-following task, whereas the proposed framework maintains stable and feasible tracking by explicitly enforcing slip ratio constraints. The dynamic weighting mechanism further enhances tracking performance relative to fixed-weight counterparts.
The results demonstrate that the proposed method significantly improves path tracking accuracy while maintaining good yaw stability, and the intervention mechanism reduces reliance on multidimensional vehicle state parameters and precise tire models and achieves predictive stability intervention by directly monitoring...
Xu Xia, Guo-Quan Ren, Gui-Chao Liu et al.· IEEE Access· 0 citations
Autonomous vehicles operating under highly dynamic conditions, such as high-speed cornering and varying road surfaces, face significant challenges in trajectory tracking owing to the highly nonlinear and time-varying nature of vehicle dynamics. This paper proposes an adaptive time-varying weighted cooperative control m...
Tian Tian, Guo-F. Tian, Gang Li· IEEE Access· 0 citations
This study proposes a driver monitoring and active rear-wheel assist steering control scheme integrating Model Predictive Control (MPC) and Recursive Least Squares (RLS) to enhance path-following precision and facilitate seamless control authority distribution in autonomous mobility. Rather than attempting to directly...
A unified robust-control framework for trajectory tracking of a four-wheel-steering autonomous vehicle is presented and Bayesian-optimized, super-twisting-inspired ST-NTSMC is a promising control strategy for robust path tracking in four-wheel-steering autonomous vehicles.
Mohammadreza Maleki, Mahdi Ansari, Hamid Rahmanei et al.· Proceedings of the Instituti...· 0 citations
This study addresses the challenges of coordinating tracking accuracy and steering control stability in agricultural differential-drive tracked vehicles, particularly their adaptability to varying working conditions. An adaptive preview Model Predictive Control (MPC) path-tracking algorithm is developed using an electr...
Wei Su, Dao-Lei Duan, Qing-Hui Lai et al.· Machines· 0 citations
We use cookies to run the site and, with your consent, for analytics and to show ads.
See our Cookie Policy.