Alloys often face a well-known trade-off: enhancing strength typically results in a reduction in ductility, and vice versa. This inherent limitation poses a significant challenge in materials engineering, particularly in applications requiring both high strength and adequate deformability. In this study, we investigate the effects of different heat treatments on the microstructures and mechanical properties of a CoCrFeNiAl0.5Ti0.1 high-entropy alloy (HEA). Our findings demonstrate that with the appropriate heat treatment, it is possible to simultaneously enhance both strength and ductility. The as-rolled CoCrFeNiAl0.5Ti0.1 HEA sheet exhibits mechanical properties with a tensile strength of 987 MPa, a yield strength of 769 MPa, and an elongation of 20.2%. After annealing treatments at 700 °C and 900 °C followed by water quenching, the alloy demonstrates simultaneous improvements in both strength and ductility. Specifically, the alloy annealed at 700 °C achieves a tensile strength of 1314 MPa, a yield strength of 970 MPa, and an elongation of 20.3%. Similarly, annealing at 900 °C results in a tensile strength of 1208 MPa, a yield strength of 727 MPa, and an elongation of 18.3%. The enhancements in mechanical properties are due to the reduction in internal stress and the occurrence of recrystallization. Additionally, the formation of fine and uniformly distributed precipitates during the heat treatment process further contributes to improvements.
The strength–ductility trade-off limits the wider application of high-strength titanium alloys in aerospace. Here, a new Ti-3.7Al-3V-3Fe-1.7Mo-0.5Cr alloy is designed based on d-electron alloy design theory and molybdenum equivalence, and the dual-phase microstructure is tailored by varying the cooling rate after solut...
Ke-Yi Li, Yi-Chuan Lu, Yun-Ting Wang et al.· Metals· 0 citations
The plasma-based additive manufacturing of the elemental-mixed refractory high-entropy alloy CrMo0.5NbTa0.5TiZr is investigated with focus on printability, microstructure, thermo-mechanical and oxidation performance. This RHEA exhibited excellent printability, enabling the fabrication of crack-free walls with stable de...
C. Belei, Z. Kováčová, Johannes Bieg et al.· Euro PM2026 Proceedings· 0 citations
Laser powder bed fusion (L-PBF) delivers significant advantages for manufacturing medium-/high-entropy alloys (MEAs/HEAs), owing to its near-net-shape manufacturing and the ability to fabricate complex geometries. In this paper, a series of (CoCrNi)100−xTix (x = 0, 1, 2, 4 wt.%) MEAs were successfully fabricated by L-P...
Seeking further breakthrough in mechanical performance of A100 ultrahigh strength steel is crucial for broadening its applications in harsh service conditions. This study utilizes laser shock peening (LSP) to modify A100 steel, characterizing microstructure evolution and tensile properties as functions of coverage la...
Fei-Fei Ji, Teng-Teng Wei, Zhao Wang et al.· Advanced Engineering Materia...· 0 citations
Conventional high-performance superalloys typically rely on substantial amounts of costly Ni and Co, raising material costs and restricting widespread industrial use. We adopt a Fe-rich FeNi-based multi-principal element alloy with the nominal composition Fe40Ni30Co10Cr10Al5Ti5 (at.%) as a model system. Via heavy cold...
Ze-Yu Xing, Xing-Hao Du, De-Zheng Liu et al.· Journal of Physics, Conferen...· 0 citations
We use cookies to run the site and, with your consent, for analytics and to show ads.
See our Cookie Policy.