Skip to content
Open access

DESIGN AND EXPERIMENTAL STUDY OF A SELF-PROPELLED ELECTRIC TRACKED CHASSIS FOR PANAX NOTOGINSENG TRANSPLANTER IN HILLY AND MOUNTAINOUS REGIONS

Aug 2026 · INMATEH Agricultural Engineering · pp. 514 · 0 citations · 5 references

Abstract

To address the challenges of low transplanting efficiency, poor planting accuracy, and high labor intensity associated with manual Panax notoginseng transplanting in the hilly and mountainous regions of Yunnan, as well as the limited adaptability of existing transplanting equipment to narrow ridged fields and steep, complex terrain, this study developed a self-propelled, fully electric tracked chassis tailored to the agronomic requirements of Panax notoginseng transplanting. The study included the overall structural design, selection and matching of the power battery and drive transmission system, and development of a dimensionless ratio-coefficient control model relating planting spacing to travel and transplanting speeds under the constraint of the manual seedling-feeding speed. An integrated electronic control system was developed to provide remote-controlled travel, speed-synchronized transplanting control, and straight-line deviation correction. The stability and dynamic performance of the chassis were analyzed theoretically and subsequently validated through field tests under multiple operating conditions. Theoretical results showed that the chassis had a maximum lateral roll angle of 39.19°, a maximum traction force of 7,524 N, and sufficient power reserve for operation on slopes of up to 25°. Field tests demonstrated that, after correction using the speed-adjustment coefficient, the straight-line deviation over a travel distance of 30 m was limited to within 1.1%, exceeding the requirements of the relevant national standard. The measured pivot-turning offset was approximately 191 mm, in close agreement with the theoretical value. Key performance indicators, including slope-climbing stability, ridge-travel stability, and motor thermal stability, all met the applicable national standards. The developed chassis effectively improves the adaptability of transplanting equipment for Panax notoginseng production in hilly and mountainous regions and significantly enhances the automation level and planting accuracy of transplanting operations. This study provides theoretical and technical support for the intelligent development of transplanting equipment for rhizomatous medicinal plants.

Read PDF

Similar papers

Review Open access Oct 2026

Power Machinery for Hilly and Mountainous Agriculture: Research Progress and Development Trends

Agricultural production in hilly and mountainous areas is characterized by fragmented fields, frequent slope variations, narrow farm roads, and highly variable soil bearing and adhesion conditions, which impose distinctive requirements on the traction and mobility, slope stability, maneuverability, and operational adap...

Yan-Hua Zhang, Xiao-Bing Ding, Hai-Yang Shen et al. · 0 citations
2026

Design and Experimentation of an Adaptive Leveling Boom for a Self-Propelled Sprinkler Irrigation Machine in Hilly Terrain

Highlights An adaptive leveling boom was developed for self-propelled sprinkler irrigation machinery operating in hilly terrain. The proposed boom achieves multi-degree-of-freedom posture adjustment through electric-actuator-based lifting and worm-gear-driven swing regulation. Integrated dynami...

Jun-Ping Liu, Jia-Bao Chai, Han Zhang et al. · 0 citations
Open access Sep 2026

A Study on Integrated Control of Tractor Speed and Tillage Depth for Power-Shift Tractors Based on Workload Adjustment

Complex unstructured factors, such as the spatial heterogeneity of soil mechanical properties and random variations in farmland topography, cause fluctuations in working load, resulting in low efficiency and poor quality of subsoiling operations. To address this, this study developed a combined speed–tillage depth cont...

Chang-Hai Luo, Jian-Hui Nie, Xinhe Shan et al. · 0 citations
Open access Sep 2026

Design and Experimental Validation of a Sweet Potato Seedling Transplanting Mechanism Based on a Non-Circular Planetary Gear Train and Fourier Series Synthesis

To address the high cost, structural complexity, and poor horizontal transplanting performance of existing sweet potato seedling transplanting mechanisms, this study proposes a Fourier series-based kinematic synthesis method and designs a non-circular gear planetary transplanting mechanism, which is then validated thro...

Bing-Liang Ye, Jia-Cheng Sang, Xue-Fu Yu et al. · 0 citations
Open access Oct 2026

Pesticide Spraying Strategy Optimization for a Tracked Air-Assisted Spraying Robot Based on a Novel Virginia Creeper Optimization Algorithm

To address the limitations of conventional constant-rate pesticide application in adapting to spatial variations in crop canopy structure, this study proposes a pesticide spraying strategy optimization method for a tracked air-assisted spraying robot based on a novel Virginia Creeper Optimization Algorithm (VCOA). Firs...

Shuai Cao, Wei-Bo Li, Xiao-Qing Deng et al. · 0 citations
Open access Oct 2026

Multi-Criteria Optimization of a Four-Bar Linkage Vibratory Mechanism for Mechanized Uprooting of Sida (Bala)

Harvesting of Sida (Bala), a medicinal crop with a deep taproot system, is mainly performed manually. This method requires considerable labour, results in low field efficiency, and often leads to root damage, particularly in compact or hard soils. To overcome these challenges, the present work examines the design and o...

M. Ganigi, Sindhu Bhaskar, V. K. Mohammed Suhail et al. · 0 citations

We use cookies to run the site and, with your consent, for analytics and to show ads. See our Cookie Policy.