Preparation of Ultra‐Salt‐Tolerant
OEMA
Hydrophobic Modified Viscoelastic Profile Control Gel and Study of Its Salt Thickening Characteristics and Plugging Performance
Oct 2026· Journal of Applied Polymer Science· Vol 143· 0 citations· 28 references
Abstract
To address the challenges of strong matrix heterogeneity, a limited flooding sweep range, and low oil displacement efficiency in high‐salinity and high‐water‐cut tight reservoirs, an amphiphilic monomer (OEMA) was introduced via aqueous dispersion polymerization to synthesize a profile control agent (SMAA‐n) with excellent water dispersibility, salt‐thickening properties, and viscoelasticity. The storage modulus of SMAA‐n exceeds the loss modulus, indicating that the profile control agent is an elastic fluid. In a salt ion environment (K
+
, Na
+
, Ca
2+
, and Mg
2+
), viscosity increases with OEMA content, producing salt‐thickening characteristics alongside good thixotropic recovery. The hydrophobic association between the octadecyl long chains enable SMAA‐n to form a dynamic network structure capable of inversion, achieving plugging via salt thickening in matrix pores, particle adaptive pore matching, and shear deformation. Introducing OEMA into the synthetic profile control agent enhances the core plugging rate, with the average value exceeding 85.0%. The final oil recovery rate of SMAA‐5% is 47.32%, considerably higher than that of unmodified SMA (36.52%). The salt thickening and strong plugging of SMAA‐n provide a new approach for profile control and flooding to enhance oil recovery in high‐salinity, high‐water‐cut heterogeneous reservoirs.
Conventional polymer flooding of medium‐to‐high‐viscosity heavy oil can be limited by near‐wellbore shear degradation and polymer retention, which impair injectivity and mobility control. Here, a hydrophobically associating water‐soluble polymer (HAWP)/sodium dodecyl sulfate (SDS) hybrid system was evaluated at 65°C...
Tight-oil reservoirs are abundant but characterized by poor physical properties and strong heterogeneity. CO2 flooding is an important technique for enhanced oil recovery (EOR) and carbon storage, yet CO2 channeling remains a critical issue due to its high mobility, and existing anti-channeling methods have limitations...
Meng-Sheng Jiang, Ji-Long Zheng, Chuan He et al.· Molecules· 0 citations
Poly(acrylic acid) (PAA)‐based hydrogel electrolytes possess favorable ionic transport properties but relatively limited network stability. This study aims to regulate the PAA hydrogel network by introducing sulfonated starch (SS) and to clarify the relationship between structural evolution, mechanical behavior, an...
To address the intrinsic trade-off between mechanical robustness and ionic conductivity in polyvinyl alcohol (PVA) hydrogels arising from structural heterogeneity, this work presents a stepwise salting-out and freeze-thaw cycling strategy to fabricate high-performance composite hydrogels with synergistic interfacial in...
Yan-Yu Liang, Ye Yu, Hong Ruan et al.· Journal of Colloid and Inter...· 0 citations
To improve thermoresponsive gel foams for coal spontaneous combustion prevention, the effects of temperature, expansion ratio, and inorganic salts on their rheology, water retention, and film-forming properties were systematically investigated. The results demonstrated that the gel foam exhibited typical yield–pseudopl...
J. Gan, Bin-Yi Yang, Ning Zhang et al.· Fire· 0 citations
Enhanced oil recovery (EOR) in oil-wet carbonate reservoirs remains challenging due to unfavourable wettability, strong oil-rock interactions, and limited sweep efficiency. This study evaluates hybrid nano–polymer flooding using SAV10 polymer combined with silica (SiO₂) nanoparticles and single-walled carbon nanotube...
Aquib Azhar Hakeem, Yahia Baouchi, M. Hashmet et al.· GOTECH· 0 citations
We use cookies to run the site and, with your consent, for analytics and to show ads.
See our Cookie Policy.