Skip to content

Mobility Control and Adsorption-Retention Behavior of an Engineered-Strain-Derived Microbial Polysaccharide in High-Temperature and High-Salinity Porous Media

Oct 2026 · Energy & Fuels · 0 citations · 35 references

Abstract

Conventional polymers often undergo viscosity loss and performance deterioration in high-temperature and high-salinity reservoirs. A novel microbial polysaccharide system developed from an engineered oil-recovery strain exhibits good temperature and salt tolerance as well as strong mobility-control capacity, indicating its potential as an oil-displacement agent. Here, we examine how adsorption and retention in porous media contribute to its mobility-control behavior under high-temperature and high-salinity conditions. The polysaccharide showed concentration-dependent shear-thinning behavior at 85 °C in formation water and significantly enhanced flow resistance during core flooding, with a maximum resistance factor of 13.05 while maintaining a moderate residual resistance factor of 1.93–2.4. Dynamic retention increased with polysaccharide concentration and decreased with injection rate, reaching a maximum of 0.43 mg/g. Static adsorption followed Langmuir-type behavior (R2 > 0.98, Langmuir affinity constant KL = 9.6 L/mg), suggesting strong polymer-mineral affinity, and single-mineral adsorption further showed preferential adsorption on clay minerals. These results indicate that adsorption and retention contribute to the flow-resistance behavior of this polysaccharide in high-temperature and high-salinity porous media, providing a basis for its application in polymer flooding under harsh reservoir conditions.

View source

We use cookies to run the site and, with your consent, for analytics and to show ads. See our Cookie Policy.