Skip to content
Review

Machine Learning-Based Prediction of Mechanical Properties of Advanced Engineering Materials: A Review of Data, Models, and Open Challenges

2026 · Journal of Advanced Materials in Engineering · 0 citations

TL;DR

This article reviews ML-based prediction of mechanical properties for crystalline compounds, steels, high-entropy alloys, concrete and architected composites and indicates that tree ensembles and neural networks are applied to composition and processing data and that knowledge-based descriptors can improve on composition alone in alloy design.

Abstract

Mechanical testing remains the reference method for characterising strength, hardness, stiffness and fatigue resistance, yet it is slow, destructive and impractical for the large compositional and processing spaces now open to advanced engineering materials. Machine learning (ML) models trained on measured or computed data have therefore been proposed as fast surrogates. The relevant literature is spread across material families, and individual studies differ in how inputs are represented, which model is used, and how generalisation error is estimated, so results are hard to compare directly. This article reviews ML-based prediction of mechanical properties for crystalline compounds, steels, high-entropy alloys, concrete and architected composites. The review is narrative and thematic but follows a documented search strategy: representative peer-reviewed studies, databases and benchmarks are organised by data representation, learning algorithm, validation practice and interpretability, and benchmark results obtained under a common protocol are compared quantitatively. The cited work indicates that tree ensembles and neural networks are applied to composition and processing data, that crystal-graph networks become competitive when roughly 10⁴ or more labelled samples are available, and that knowledge-based descriptors can improve on composition alone in alloy design. Recurring open issues include small and heterogeneous experimental datasets, non-uniform validation protocols, data leakage and overfitting, uncertainty quantification, and the limited use of physical knowledge. The article closes with a decision flow for model selection and a reporting-oriented workflow intended to make future studies easier to reproduce and compare. No new experimental results are presented.

View source

Similar papers

Review Open access Sep 2026

Explainable Machine Learning for Compressive Stress Prediction in Cement-Based Construction Materials: A Systematic Benchmarking and SHAP Interpretability Study

This study addresses three recurring weaknesses of the machine learning literature in this area: model comparisons are seldom made under one shared data split and are rarely validated statistically; raw mix-design variables are usually passed to the learner without encoding established concrete science; and analysis co...

M. Rao, C. Manjunath, G. M. Reddy et al. · 0 citations
Open access Sep 2026

Phase-stability-guided explainable machine learning for mechanical-property prediction and experimentally supported candidate screening of high-entropy alloys

High-entropy alloys (HEAs) provide a broad compositional space for developing structural materials with balanced phase stability and mechanical performance. However, reliable mechanical-property prediction remains challenging because alloy chemistry, phase constitution, processing state, and model uncertainty are s...

De-Rong Yuan, De-Lin Yuan, Xiao-Yu Xu · 0 citations
Open access Oct 2026

Machine Learning-Based Prediction and Mix Design Optimization of the Mechanical Properties of Engineered Cementitious Composites and Ultra-High-Performance Concrete: Toward Sustainable Construction

Mix design of engineered cementitious composites (ECC) and ultra-high-performance concrete (UHPC) requires accounting for nonlinear relationships between constituent proportions and mechanical properties. This study develops a literature-based framework combining strength prediction, model interpretation, and constrain...

Wen-Wei Wang, Jing-Wen Li, Xiang-Yong Yu et al. · 0 citations
Review Open access Sep 2026

Analysis of concrete properties through machine learning models

Machine Learning (ML) models, the most prominent methodologies, are now being employed in practically all fields to address difficult and complex problems with a coding-free solution. ML has recently been used in enormous civil engineering applications including cost analysis during construction phase, workforce manage...

R. Saravanakumar, N. V., Nandhagopal Subramani et al. · 0 citations
Open access Sep 2026

Predictive Modelling of Steel Corrosion: A Comparative Study of Statistical and Machine Learning Methods with a Focus on Copper Behavior

Accurately predicting corrosion rates in low-alloy steels is a significant challengein materials engineering due to the intricate and nonlinear interaction between environmental exposure conditions and alloying elements. Conventional statistical corrosion models are by and large based on linear assumptions, and thereby...

Mohanad S. Hasan, A. Bader, Saad Shauket Sammen · 0 citations
Open access Sep 2026

Prediction of tensile properties in fiber-reinforced composites by machine learning models

The results validate the feasibility of applying ML, particularly instance-based and ensemble learning models, to predict the tensile behavior of fiber-reinforced composites using a limited experimental dataset, thereby reducing reliance on destructive testing and accelerating the design of high-performance hybrid comp...

Md. Mominur Rahman, A. Ismail, Muhammad Faiz Ramli et al. · 0 citations

We use cookies to run the site and, with your consent, for analytics and to show ads. See our Cookie Policy.