Oct 2026· ce/papers· Vol 9· 0 citations· 5 references
Abstract
The cement industry is one of the major sources of global CO2 emissions, creating an urgent need for sustainable alternatives to conventional Portland cement. This study investigates the feasibility of high‐volume clinker replacement using calcined clay and marble dust, an industrial byproduct generated during marble processing, as supplementary cementitious materials (SCMs). Ternary binder systems containing only 35% clinker were developed with the remaining fraction replaced by a 1:2 ratio (by weight) of marble dust to calcined clay at a constant water‐to‐binder ratio of 0.4. Mechanical performance was evaluated through compressive strength testing at 3, 10, and 28 days, while microstructural evolution was assessed using mercury intrusion porosimetry (MIP). The results demonstrated continuous strength development, with compressive strengths of 19.1 MPa, 38.1 MPa, and 46.8 MPa achieved after 3, 10, and 28 days, respectively. Despite the high clinker replacement level, the developed binder system attained compressive strengths exceeding 40 MPa at 28 days, indicating satisfactory mechanical performance. MIP analysis further revealed progressive pore refinement and reduction in total porosity with hydration time, confirming the development of a denser and more stable microstructure. The findings highlight the strong potential of utilizing industrial waste materials such as marble dust in high‐volume clinker replacement systems for the production of sustainable, low‐carbon, and mechanically competent cementitious materials.
The strong demand for traditional Portland cement (OPC) is a significant contributor to the construction-related CO2 emissions whereas the conventional cement systems are still susceptible to chloride intrusion, sulfate attack and the loss of longevity in hostile environments. In this study, eco-friendly cementitious m...
Z. A. Thoeny, L. Bernardo· Research on Engineering Stru...· 0 citations
Reducing the clinker factor of cement is a key strategy for lowering the CO2‐emissions of concrete. This is also particularly significant for ultrahigh performance concrete (UHPC), which contains approx. 800 kg/m3 of cement. Calcined clays are a promising option that has already produced excellent performance and susta...
Cristin Umbach, Magdalena Fremder, N. Beuntner et al.· ce/papers· 1 citation
Low‐carbon supersulfated cements (SSC) are promising binders for reducing CO2 emissions because they contain high amounts of slag and only minor clinker. However, their practical use is still limited by slow early‐strength development and sensitivity to chemical admixtures. In this study, belite–ye'elimite–ferrite (BYF...
This study investigates the rheological, structural-mechanical, and strength properties of composite cement-based binders containing finely dispersed mineral fillers, including limestone, zeolite-containing rock, and microsilica. The effects of cement content in the range of 10–50% on water demand, yield stress, settin...
U. Turgunbayev, Jumagul Turgunbayeva, Ziyovuddin Rakhimjonov et al.· Vibroengineering PROCEDIA· 0 citations
The cement industry is a major source of global CO2 emissions, driving the development of low-carbon alternatives such as geopolymers. This study examines geopolymer binders produced from ceramic brick waste (CBW) and metakaolin waste (MKW), evaluating their fresh and hardened properties as well as their performance un...
Martynas Statkauskas, D. Vaičiukynienė, Audrius Grinys et al.· Materials· 0 citations
We use cookies to run the site and, with your consent, for analytics and to show ads.
See our Cookie Policy.