Optimization of Heat and Mass Transport in Mechanical Devices for Hybrid Solar–Thermal Energy Harvesting
Abstract
Hybrid solar–thermal energy harvesting systems are an important advancement in renewable energy technology, enabling simultaneous production of electrical power and useful thermal energy within a single compact platform. However, their performance is often limited by poor heat transfer and inefficient mass transport of working fluids, leading to photovoltaic thermal degradation and significant exergy losses. This study aims to optimize heat and mass transport processes in a hybrid solar–thermal mechanical system to enhance energy recovery and ensure long-term operational reliability. A three-dimensional numerical model based on the finite volume method (FVM) was developed using the governing equations of continuity, momentum, and energy conservation. A Multi-Objective Genetic Algorithm (MOGA) was employed to determine optimal microchannel geometries by analyzing variable cross-section effects on flow behavior and thermal boundary layer disruption. At the Reynolds number of 2000, the optimized configuration increases the average Nusselt number by 43.5% compared to a smooth channel. Consequently, the photovoltaic operating temperature decreases by 12.6 ◦ C, improving electrical efficiency by 9.3%. The system achieves a maximum thermal efficiency and net energy gain of 76.8%, while maintaining an acceptable 16.3% increase in pumping power. The results confirm that optimizing mass transport is essential for effective thermal regulation and improved energy conversion performance, providing a strong foundation for high-efficiency solar collector design.