Oct 2026· G-Tech· Vol 10, pp. 1750-1760· 0 citations· 20 references
Abstract
HVAC systems in educational buildings often operate according to fixed schedules, which can result in unnecessary cooling during periods of low or zero occupancy. This study evaluates an occupancy-based adaptive setpoint control strategy to reduce cooling energy consumption while maintaining acceptable thermal comfort. Three control strategies—schedule-based, occupancy-based, and occupancy-based adaptive setpoint control—were compared using building energy simulation. The simulations were conducted with OpenStudio and EnergyPlus for two educational spaces with different occupancy characteristics at Politeknik Elektronika Negeri Surabaya, using the same building, weather, internal-load, and HVAC configurations. The simulation covered the academic period from 18 August to 5 December 2025 with a 10-minute timestep. Energy performance was evaluated from cooling-coil electricity consumption, while thermal comfort was assessed using Predicted Mean Vote (PMV), Predicted Percentage of Dissatisfied (PPD), and discomfort hours. The occupancy-based strategy reduced cooling-coil electricity consumption by 14.52% compared with schedule-based control. The adaptive setpoint strategy achieved a 32.15% reduction compared with the schedule-based baseline and resulted in 23.7 discomfort hours. These results indicate that occupancy information combined with rule-based setpoint adaptation can reduce cooling energy consumption while providing a basis for evaluating the associated thermal comfort performance.
Maintaining thermal comfort while reducing residential energy costs is challenging under uncertain weather conditions and increasing renewable energy penetration. This paper proposes a scenario-based stochastic Model Predictive Control (MPC) framework for the coordinated operation of HVAC systems and battery energy sto...
Anastasios Tsiakalos, Apostolos Tsiakalos· Building Services Engineerin...· 0 citations
Policy-led housing renewal and standardized rural-house atlases are reshaping contemporary Yi rural housing, yet trade-offs among energy performance, winter cold discomfort, and daylighting remain poorly quantified. This study aimed to quantify the effects of design parameters on energy use, winter cold discomfort, and...
Shan-Yu Ji, Hai-Nan Yan, B. Dewancker· Buildings· 0 citations
Benchmark reward rankings for intelligent cooling control do not necessarily represent thermal control or energy savings. This study introduces a closed-loop audit that separates available thermal authority from realised thermal effect in an occupancy-aware cooling benchmark for an 80 m² Moroccan apartment. A simplifie...
Tarik Elyemli, Jihane Gharib, Ahmed Ait Errouhi· Journal of Ecological Engine...· 0 citations
Energy-efficient buildings require efficient ventilation to achieve low-energy demand while maintaining good indoor air quality (IAQ) and comfort. This study analyses the impact of different ventilation systems (i.e., automated window ventilation, extract air system and mechanical ventilation with heat and enthalpy r...
M. Magni, G. Rojas, E. Venturi et al.· Indoor and Built Environment· 0 citations
This work investigates a coupling-aware, decentralized formulation of the on-policy SARSA (State–Action–Reward–State–Action) algorithm for real-time HVAC control in multi-zone open-plan offices and indicates that the approach is computationally compatible with resource-constrained building energy management system (BEM...
M. A. Attia, M. A. Abdelaal, E. Sallam· Neural computing & applicati...· 0 citations
Building heating energy demand is influenced by indoor temperature, air exchange, and climatic conditions. This study examines the individual and combined effects of these parameters on a district-heated multi-apartment residential building in Osijek, Croatia. A TRNSYS model was evaluated using measured space-heating c...
M. Živić, Matej Đuranović, A. Barac et al.· Sustainability· 0 citations
We use cookies to run the site and, with your consent, for analytics and to show ads.
See our Cookie Policy.