Deep coalbed methane (CBM) has emerged as an indispensable resource for expanding worldwide natural gas production and reserves. Nevertheless, the combined impact of in situ stress and moisture on gas adsorption properties under deep geological conditions remains poorly documented, severely restricting the efficient exploitation of deep CBM. This work comprehensively explored the combined effects of stress and moisture on the gas adsorption capacity. By introducing a moisture attenuation coefficient and a stress correction factor, we developed a modified Langmuir model to account for these synergistic effects. CO2 isothermal adsorption experiments were carried out on both dry and moist coal samples at varying hydrostatic pressures (4, 8, and 12 MPa). The findings demonstrate that CO2 adsorption in coal conformed to typical Langmuir behavior, with the proposed modified model exhibiting excellent agreement with the experimental data. Notably, hydrostatic pressure severely inhibited the CO2 adsorption capacity of coal, an effect that was markedly amplified in the moist samples. At an equilibrium pressure of 1 MPa, increasing the hydrostatic pressure from 4 to 12 MPa reduced the CO2 adsorption capacity of the dry coal samples by 29.81%, whereas the moist samples experienced a drastic decrease of 59.95%. Furthermore, moisture consistently suppressed the level of CO2 adsorption across the entire equilibrium pressure range. Investigations into the evolution of the specific surface area (SSA) revealed that both the hydrostatic pressure and moisture independently restricted the SSA of coal to varying degrees. Finally, parametric sensitivity analysis was conducted to quantify how the Langmuir maximum adsorption capacity (a) and adsorption equilibrium constant (b) affected CO2 adsorption predictions. These findings provided a theoretical reference for analyzing gas adsorption rules in deep coal seams and optimizing CBM extraction schemes.
CO2 geological storage in deep coal seams provides dual benefits of carbon storage and enhanced coalbed methane recovery. However, the CO2–water–coal interactions during storage significantly deteriorate the coal’s mechanical properties through swelling and softening mechanisms, seriously threatening reservoir stabil...
Shuai-Kang Xie, Jun-Jie Wei, Feng-Pu Gao et al.· Energy & Fuels· 0 citations
Methane, the primary component of coalbed methane (CBM), occurs predominantly in the adsorbed state in coal. Accurate characterization and prediction of methane adsorption under high-temperature and high-pressure conditions are therefore essential for evaluating deep CBM resources. However, conventional adsorption mo...
Rui-Jin Li, Wan-Rong Zhuang, Wei Wang et al.· Energy & Fuels· 0 citations
To explore the evolution pattern of physical properties after injecting supercritical CO
2
(ScCO
2
) into water‐containing coal reservoirs, under the temperature and pressure conditions of 35°C and 9 MPa (in the state of ScCO
2
), a micro‐reactive experiment of coal–water–CO
2
was carried out using a high‐p...
Jun-Wen Zhou, En-Guang Han· Energy Science & Enginee...· 0 citations
Organic matter dissolution by oxidants can enhance the coal permeability. However, as coalbed methane (CBM) is predominantly reserved in the adsorbed state, the organic matter dissolution changes the adsorption–desorption equilibrium, thus affecting the CBM production. Current studies have not sufficiently addressed th...
The High-Temperature Flue Gas Enhanced Permeability and Displacement (HFG-ECBM) technology combines the advantages of low gas source costs and thermal-induced permeability enhancement, making it a key technical approach to overcoming bottlenecks in deep coalbed methane (CBM) extraction. Based on multispectral character...
Nan Ding, Jian-Ping Wei, Lei-Lei Si et al.· Langmuir· 0 citations
We use cookies to run the site and, with your consent, for analytics and to show ads.
See our Cookie Policy.