Skip to content
Open access

3D-Printing of Magnetoactive Gelatin–Alginate Scaffolds

Sep 2026 · Pharmaceutics · Vol 18, pp. 1186 · 0 citations · 60 references
Medicine

Abstract

Background/Objectives: Magnetically responsive biomaterials have emerged as promising platforms for tissue engineering as they allow remote stimulation of cells and improved control over tissue regeneration. Although gelatin–alginate hydrogels incorporating iron oxide nanoparticles have been reported, the use of U-type hexaferrite particles, particularly Al3+-substituted compositions, remains largely unexplored. This study aimed to develop and characterize extrusion-based 3D-printed gelatin–alginate scaffolds containing U-type hexaferrite particles and to evaluate the influence of particle composition and loading on the rheological, physicochemical and magnetic properties of the resulting biomaterials, as well as their in vitro compatibility with macrophages. Methods: Gelatin–alginate inks containing two U-type hexaferrite compositions (Ba4Co2Fe36−xAlxO60; x = 0.0 and x = 1.0) at two particle loadings (20 and 200 mg) were prepared and processed by extrusion-based 3D printing. The scaffolds were characterized by rheological analysis, SEM-EDS, FTIR, swelling measurements, magnetic responsiveness, and in vitro biological evaluation using RAW264.7 macrophages. Results: The inks exhibited suitable shear-thinning behavior and viscoelastic properties for extrusion-based printing. Increasing particle loading enhanced the thermal resistance of the network, whereas Al3+ substitution modified the viscoelastic response of the polymeric network. The 3D scaffolds successfully responded to an external magnetic field and SEM-EDS confirmed the homogeneous incorporation of hexaferrite particles. The magnetic scaffolds did not compromise macrophage metabolic activity. Conclusions: U-type hexaferrite particles provide an effective strategy for producing 3D-printed magnetically responsive scaffolds with tunable rheological properties without inducing an inflammatory response. The combined modulation of particle composition and loading represents a versatile approach for designing multifunctional inks with potential applications in tissue engineering.

Read PDF

Similar papers

Open access Oct 2026

Engineering Emulgel-Based Inks for 3D Printing Scaffolds with Enhanced Porosity for Supporting Cell Proliferation.

Highly porous hydrogel scaffolds are critical for advancing three-dimensional printing in tissue engineering. Interconnected porous networks facilitate nutrient diffusion, waste removal, and cell infiltration, necessary processes for tissue regeneration. Emulgel-based inks are developed using oil-in-water Pickering emu...

Ingri Mancilla-Corzo, Jéssica Heline Lopes da Fonsêca, M. Guimarães et al. · 0 citations
Open access Oct 2026

Fabrication and Characterization of 3D-Printed Polylactide Composite Scaffolds with Modified Graphene

In this study, we introduce novel multifunctional biomaterial inks for extrusion-based 3D bioprinting to create scaffolds for potential tissue engineering. This study focuses on developing composite materials by incorporating alkyl ketene dimer (AKD)-modified graphene nanoplatelets (GP) into polylactide (PLA) using a s...

Worathep Khimlek, Jirawan Jindakeaw, V. Primpray et al. · 0 citations
Open access Sep 2026

Chemically-induced Jamming and 3D printing of Granular Hydrogels: Microgels as Reservoirs of Volume

Granular hydrogels, made of jammed soft microparticles, are of great interest for 3D (bio)printing, as they combine ideal rheological properties and extensive modularity, yielding favorable microstructures for tissue engineering. Typically, the yield-stress properties of these materials, which facilitate printability,...

Micaela Fernandes, Julien S. Es Sayed, Armin Amirsadeghi et al. · 0 citations
Open access Oct 2026

Development and Mechanical Characterization of Novel Gelatin–Fish Oil Composite Hydrogel for 3D Bioprinting

Gelatin-based hydrogels are attractive bioinks for extrusion bioprinting because they combine biocompatibility, tunable rheology, and the ability to incorporate bioactive compounds. In this study, a novel multicomponent gelatin hydrogel containing fish oil, Tween 80, lecithin, glycerin, psyllium husk, and ascorbic acid...

Djordje Milosevic, Marija Branković, K. Virijević et al. · 0 citations
Open access Sep 2026

Development of Extrusion-Based 3D Printing Technology for Hydrogel Shape-Morphing Scaffolds and Simulation of Their Spatial Deformation

Additive manufacturing makes it possible to create objects with complex geometry for various applications, including personalized implants. Hydrogel scaffolds with shape-morphing effects are of particular interest in the field of soft tissue engineering. This work describes the technology of extrusion-based 3D printing...

N. Menshutina, A. Abramov, Yan Sulkhanov et al. · 0 citations
Oct 2026

PCL Scaffolds with Hardystonite and Magnetite Nanoparticles Under a Pulsed Magnetic Field for Bone Tissue Engineering

Achieving scaffolds with suitable mechanical properties and bioactivity is a crucial need for bone tissue engineering. In this study, we present novel 3D-printed scaffolds composed of poly(ε-caprolactone) (PCL), hardystonite (HT), and Fe 3 O 4 magnetic nanoparticles, designed to combine enhanced mechanical stiffn...

Narmin Zarinabadi, R. Abedini-Nassab, Amin Hadi et al. · 0 citations

We use cookies to run the site and, with your consent, for analytics and to show ads. See our Cookie Policy.