Skip to content
Open access

Autonomous Corrosion‐Self‐Healing Coatings of Microencapsulated Soybean Oil on Mild Steel

Oct 2026 · Applied Research · Vol 5 · 0 citations · 33 references

Abstract

In the oil and gas industry, the failure of protective coatings can cause material degradation, which can be hazardous for safety, asset integrity and environmental health. In this study, the use of an autonomous (self‐healing) microencapsulated corrosion coating, using microencapsulated soybean oil (SBO), was explored and the protection was tested for mild steel immersed in 3.5wt.% NaCl solution. The coating formulation consisted of emulsion of soybean oil, EMA, resorcinol, ammonium chloride, 1‐octanol, urea, 37wt.% aqueous formaldehyde solution and distilled water. The electrochemical impedance spectroscopy (EIS) results showed that the corrosion resistance of the mild steel was greatly improved after being coated with SBO, as compared to the control. The best results have been achieved with the 30 mL SBO coating, with the acceptable impedance response and the lowest corrosion current density. A uniform and protective coating layer that has enhanced corrosion damage resistance has been confirmed by optical microscopy, scanning electron microscopy (SEM) and energy‐dispersive x‐ray spectroscopy (EDX). The FT‐IR data confirmed the inclusion of the soybean oil in the coating and electrochemical tests showed the enhancement of the corrosion protection performance with the concentration of the soybean oil. Based on the results of this study, it appears that the coatings prepared using microencapsulated soybean oil are suitable self‐healing corrosion protection systems, which may be more environmentally friendly and sustainable for mild steel.

Read PDF

Similar papers

2026

Abrasive-Resistant and Anti-Corrosion Thin-Layer Self-Healing Polyurethane Protective Coating

The physical, mechanical, adhesive, and anticorrosive properties of a self-healing protective coating were investigated. The coating hardness was (62±2) Shore D, which corresponds to the level typical of wear-resistant polyurethane materials. The adhesion strength reached (5.0±0.2) MPa for the glass substrate and (3.0±...

Z. A. Lokiaeva, I. Storozhuk · 0 citations
Oct 2026

Stimuli-Responsive Epoxy Coatings with pH-Triggered Self-Healing for Long-Term Marine Corrosion Protection

Marine steel structures suffer severe corrosion from continuous seawater exposure, chloride ions, and mechanicaldamage, while conventional epoxy coatings provide limited protection after coating failure. This research develops three pH-triggered self-healing epoxy coatings using a zinc-rich epoxy primer on American Soc...

Vikramsinha V. Mane, Vratraj K. Joshi, M. R. Ranganathaswamy et al. · 0 citations
Sep 2026

Influence of Na2MoO4 Additive on the Corrosion Resistance of Microarc Oxidation Coatings on 6061 Aluminum Alloy

Aluminum alloys are indispensable in industrial applications due to their excellent mechanical properties, but they are prone to corrosion in humid environments. Microarc oxidation (MAO) technology can form a ceramic-like oxide layer on their surface, significantly enhancing corrosion resistance and other properties. T...

Yao Du, Song-Tao Zhu, Ying Xu et al. · 0 citations
Open access Oct 2026

A hybrid ceramifiable hydrophobic coating with integrated fire-resistance and weatherability

Steel structures in coastal oil and gas facilities are particularly susceptible to corrosion and fire hazards, posing significant challenges to structural integrity and fire safety. Anti-corrosion coatings provide excellent corrosion resistance for the steel, while, in the case of the 1200 °C flame conditions, inorgani...

Jun-Hui Zhang, Guan-Yuan Zheng, Hai-Chun Zhang et al. · 0 citations

We use cookies to run the site and, with your consent, for analytics and to show ads. See our Cookie Policy.