2026· IEEE Systems, Man, and Cybernetics Letters· Vol 1, pp. 116-123· 0 citations· 19 references
TL;DR
The paper clarifies the current scope of AI4U and introduces a conceptual perception-chain reconfiguration example to show how future module replacement can be represented as a localized and checkable operation.
Abstract
Cyber-physical autonomous systems combine perception, decision-making, communication, and control to perform tasks with limited human involvement. Their design is still often manual and project-specific. This paper presents the current state of AI4U, an emerging metadata-driven methodology for the modular design of such systems. AI4U is being developed to describe hardware and software modules, support their composition, and check selected interface and deployment constraints. The methodology is discussed using MobiRobAI as the first full-scale application-driven development and validation case. MobiRobAI includes a ground mobile platform prepared for integration with a 7-DoF Kinova manipulator for greenhouse harvesting and a custom-built hexacopter UAV for photovoltaic panel inspection and servicing. Both demonstrators are used to refine the AI4U descriptor model and to test how perception, task planning, control, communication, and safety-related functions can be represented in one modular architecture. The paper clarifies the current scope of AI4U and introduces a conceptual perception-chain reconfiguration example to show how future module replacement can be represented as a localized and checkable operation.
A modular DT framework for industrial environments that jointly models physical processes, wireless communications, and application logic within a unified architecture is proposed, highlighting the potential of integrated DTs as tools for the pre-deployment design and validation of next-generation industrial systems.
Sara Cavallero, F. Tonini, Tony Chahoud et al.· 0 citations
Environmental-monitoring systems often bundle sensing, communication, storage, visualization, and control into one application, making later changes difficult. We designed a service-oriented platform that separates these functions through defined interfaces. It combines a Raspberry Pi gateway, a dedicated motor-control...
Andrada Puisor, Stefan Caramizoiu, S. Iordache et al.· Applied Informatics· 0 citations
Modern intralogistics require flexible automation, yet traditional fleet management system (FMS) architectures are often monolithic and lack the interoperability needed for heterogeneous robot fleets. To address this, we present Aulis, an open-source, modular, and agent-based FMS designed for the vendor-agnostic coordi...
Peter Detzner, Dennis Lünsch, Lars Toenning et al.· IEEE International Conferenc...· 2 citations
Frota 360 is a robot fleet management (RFM) framework designed to support autonomous inspection in oil and gas (O&G) facilities, where operators must coordinate heterogeneous robots under strict safety, connectivity, and cybersecurity constraints. Existing commercial solutions are typically cloud-centric, vendor-specif...
G. Freitas, R. Mesquita, L. Pimenta et al.· IEEE Access· 0 citations
The PhysAI-Bench is introduced, a benchmark for evaluating the agentic decision-making required for reliable autonomy in Physical AI, which contains 10,178 standardized decision instances automatically extracted from conversational traces of autonomous UAV missions.
M. Ferrag, M. Debbah, Abderrahmane Lakas et al.· arXiv.org· 0 citations
The design and first deployment of an integrated autonomous inspection and asset performance management solution at a Kuwait Oil Company (KOC) facility, delivered through a tripartite collaboration between KOC, SLB and ANYbotics, demonstrated that fusing autonomous robotic inspection data with ERP and DCS sources on a...
Muzahidin Muhamed Salim, J. Alvarez, I. Graa et al.· ADIPEC· 0 citations
We use cookies to run the site and, with your consent, for analytics and to show ads.
See our Cookie Policy.