Skip to content
Open access

Magnetized Graphene-Based Metasurface for Terahertz Cross-Polarization Conversion

Sep 2026 · Applied Sciences · Vol 16, pp. 8913 · 0 citations · 21 references

Abstract

A broadband magnetically tunable reflective metasurface based on magnetized graphene is presented for terahertz cross-polarization conversion. The metasurface adopts a three-layer stacked configuration consisting of a patterned graphene resonator, a dielectric spacer, and a metallic ground plane. Under perpendicular magnetic induction, magnetized graphene exhibits in-plane gyrotropic surface conductivity featuring prominent Hall components. Coupled with resonant interactions within the asymmetric unit cell, this intrinsic property facilitates the efficient conversion of normally incident y-polarized terahertz waves into x-polarized counterparts. Numerical results demonstrate that under an external magnetic induction of 3 T, the polarization conversion ratio exceeds 0.95 across the 1.40–2.80 THz band, generating a relative bandwidth of 66.7%. Moreover, its polarization conversion response can be dynamically modulated by varying the external magnetic induction. These simulated results verify that the designed metasurface is a promising candidate for gate-free, broadband, and reconfigurable terahertz polarization manipulation systems.

Read PDF

Similar papers

Open access Sep 2026

A VO2-based terahertz broadband absorption and polarization conversion metasurface

This work investigates a switchable terahertz metasurface based on vanadium dioxide (VO2). Through temperature-induced modulation of the VO2 conductivity, reversible switching between broadband absorption and polarization conversion was achieved. The properties of the designed metasurface were analyzed using CST simula...

Xiya Ming, Heng-Li Feng, Ya-Chen Gao · 0 citations
Oct 2026

Numerical simulation of a chiral metasurface based on GST for multifunctional terahertz polarization control

Ge₂Sb₂Te₅ (GST) is a representative chalcogenide phase-change material that has received growing interest due to its non-volatility, rapid nanosecond-scale response and substantial differences in optical constants between its crystalline and amorphous states. This work proposes a bidirectional chiral metasurface base...

Yang-Mao Luo, Chao-Ling Du, Wei-Wei Xie et al. · 0 citations
Open access Oct 2026

A passive multifunctional reflective terahertz metasurface enabling broadband polarization conversion and frequency-selective spin-handedness manipulation

A compact multifunctional reflective terahertz (THz) metasurface is proposed for broadband polarization manipulation. The proposed anisotropic metasurface enables linear-to-linear (LP–LP) and linear-to-circular (LP–CP) polarization conversion using an asymmetric split-square resonator loaded with a diagonal metallic st...

Harish Raizada, Nitesh Kashyap · 0 citations
Open access Oct 2026

Broadband asymmetric transmission and cross-polarization conversion in an interlayer-coupled bilayer chiral metasurface

This paper presents a bilayer 3D-chiral metasurface for broadband asymmetric transmission (AT) and cross-polarization conversion in the microwave regime. The structure achieves a polarization conversion ratio (PCR) above 93% over 10.0–15.3 GHz, peaking at 98%. Simulations further indicate that high PCR is largely retai...

Pegah Sadeghi Chemeh, S. Jam · 0 citations
Open access Oct 2026

Tunable graphene/Sb2Se3 based metamaterials for reconfigurable terahertz devices

Chiral metamaterials provide a powerful route for controlling the polarization state of terahertz (THz) waves; however, most reported structures rely on static metallic geometries with limited tunability. In this work, we present an actively tunable graphene/Sb2Se3 hybrid chiral metamaterial designed for dynamic modula...

Y. Demirhan, Bora Akyurek, Sanem Demirbas et al. · 0 citations
Sep 2026

Numerical study of a tunable graphene terahertz absorber with an asymmetric ring-comb metasurface.

A tunable terahertz absorber based on a comb-integrated asymmetric ring graphene metasurface is numerically investigated. The device has a compact trilayer configuration consisting of monolayer graphene, a SiO2 spacer, and an Au back reflector. When the graphene Fermi level increases from 0.5 to 1.0 eV, the main absorp...

Le Zhang · 0 citations

We use cookies to run the site and, with your consent, for analytics and to show ads. See our Cookie Policy.