Skip to content
Open access

Metasurface-Enhanced Near-Field Communication Coils

2026 · IEEE Journal of Radio Frequency Identification · Vol 10, pp. 929-938 · 0 citations · 49 references

Abstract

Metallic proximity degrades near-field communication (NFC) performance by inducing eddy currents and distorting the coils magnetic field. Conventional NFC systems typically employ ferrite sheets to mitigate these effects. In this work, we propose a thin metasurface composed of an array of capacitor-loaded split-ring resonators tuned to the NFC operating frequency of 13.56 MHz to suppress metal-induced degradation. A printed NFC coil above a metal plate is investigated for three configurations: metal only, metal with ferrite, and metal with the proposed metasurface. Full-wave simulations and measurements demonstrate that the metasurface enhances the magnetic-field intensity and improves coil–metal decoupling. Experimental results show an improvement in transmission coefficient of up to 7.9 dB over an 80 mm transfer distance compared with the metal-only case. Read-range measurements with a commercial NFC reader confirm an increase from 48 mm to 72 mm when the metasurface is used. The proposed approach provides a compact, tunable, and fabrication-friendly alternative to ferrite shielding for metal-tolerant NFC systems, without added bulk or material cost, and avoids the sustainability drawbacks of ferrites.

Read PDF

Similar papers

Open access Sep 2026

Magneto-inductive waveguiding using a step-defect line in a reconfigurable digital metasurface for wireless power transmission

In this paper, we present a reconfigurable digital two-dimensional metasurface consisting of an 8 × 8 matrix of specialized unit cells that can dynamically switch between two resonance modes at 11 MHz and 13.56 MHz. By carefully designing defect-based metamaterial cavities, flexible waveguides are formed while effectiv...

X. Pham, Kim Hoan Vu, X. Nguyen et al. · 0 citations
Open access Oct 2026

Robust free-space chiral hotspots in planar all-dielectric meta-GMR metasurfaces

All-dielectric chiral metasurfaces have emerged as a promising platform for enhancing chiroptical interactions. However, placing enhanced chiral near fields in regions geometrically accessible to external analytes remains a critical challenge for practical sensing applications. Here, we experimentally demonstrate a pla...

Yung-Chih Liu, Tzu-Yao Chao, Qiu-Chun Zeng et al. · 0 citations
Oct 2026

Full-phase single-layer metasurfaces with C4-symmetric resonators via multipolar interference

Complete and efficient manipulation of electromagnetic (EM) waves is a cornerstone for creating advanced functional devices. However, conventional single-layer passive metasurfaces often face an intrinsic trade-off between phase-modulation range and reflection efficiency. To overcome this limitation, we propose and dem...

Fang-Yuan Qi, Rui-Chao Zhu, Zhi-Hao Guo et al. · 0 citations
Open access Oct 2026

Below-Cutoff Propagation in a Metasurface-Cladded Waveguide

This work presents the design, fabrication, and experimental validation of a circular metasurface (MTS)-cladded waveguide that enables electromagnetic propagation below its natural cutoff frequency. A lumped-element model based on a coupled-resonator lattice is introduced to describe the cladding MTS behavior and to pr...

M. Sartore, Elise Bessac, A. Cester et al. · 0 citations

We use cookies to run the site and, with your consent, for analytics and to show ads. See our Cookie Policy.