Phase change materials (PCMs) have garnered widespread interest in battery thermal management (BTM) for their excellent temperature regulation, high thermal storage density, and passive cooling without additional power consumption. Nevertheless, conventional PCMs fail to simultaneously mitigate capacity degradation caused by extremely high/low ambient temperatures and suppress battery thermal runaway (BTR) risks. Herein, a Janus‐structured phase change composite built on aramid nanofiber (ANF) aerogels, is engineered for multi‐mode adaptive BTM applications. The bilayer asymmetric architecture is constructed with boron nitride nanosheets embedded in the large‐pore ANF layer to deliver high thermal conductivity (1.860 W m−1 K−1) and large latent heat (189.23 J g−1) after PCM impregnation, while fluorosilane modification imparts the small‐pore ANF layer remarkable thermal insulation (0.028 W m−1 K−1) and flame retardancy. The as‐resulted composite with a thickness of 7 mm achieves an 8.60°C reduction in the surface temperature for commercial 2000 mAh lithium‐ion batteries under 3 C charge/discharge cycling. It also drastically decreases the peak runaway temperature from 798.29°C to 240.85°C and effectively blocks BTR propagation between adjacent cells. Meanwhile, the composite raises the usable discharge capacity from 770 to 1275 mAh at −20°C, offering a promising strategy for developing multi‐mode adaptive BTM systems.
To address critical safety vulnerabilities in Li‐Mg battery (LMB), particularly internal short circuits and thermal runaway, we report a novel smart gel polymer electrolyte (HEMOF@TP@DZC GPE) that synergistically enhances electrochemical performance and intrinsic safety. The innovation centers on a hollow high‐entr...
A bio‐based binary eutectic phase change material (PCM) composed of 1,10‐decanediol (DDL) and sebacic acid (SEA) was developed for passive thermal management of electronic devices. The eutectic composition was optimized through theoretical calculations and experimental validation to achieve a high latent heat. Expand...
Yuxuan Lin, Kai Fu, Song-Ping Mo et al.· Energy Technology· 0 citations
Carbon-based shape-stabilized phase change materials (SSPCMs) are promising for thermal energy storage, but their performance is often limited by low PCM loading. Enhancing the compatibility between the PCM and supporting matrix is an effective approach to address this issue. Herein, biomass waste was converted into ac...
Few challenges are as pressing as the global energy crisis and climate change, and solar energy is uniquely positioned among renewables to address them. However, the practical application of photovoltaic (PV) panels is severely constrained by efficiency losses caused by overheating during operation. Given their outstan...
Dong-Sheng Hu, Yue Liu, Yi-Fang Liang et al.· Journal of Physics, Conferen...· 0 citations
The advancement of intelligent thermoregulatory textiles utilizing phase change materials (PCMs) represents a critical frontier in next‐generation human thermal management technologies. Conventional fabrication methods for oil‐soluble PCMs necessitate substantial quantities of organic solvents during wet spinning pro...
Run-Ze Wang, Shao-Kun Song, Hong Ai et al.· Polymer Engineering & Sc...· 0 citations