Synthesis and Characterization of a Nonionic Aminoamide Surfactant for Enhanced Oil Recovery
Abstract
This study synthesizes and evaluates a renewable, nonionic aminoamide surfactant for improved oil recovery. Surfactant injection is a key technique in chemically enhanced oil recovery (EOR); it minimizes interfacial tension (IFT) and mobilizes residual oil. Over the past decade, this research area has focused on eco-friendly, salt-tolerant systems. Biodegradable, nonionic surfactants derived from renewable triglycerides are the primary focus (Shaikhah et al. 2024; Hama et al. 2023). Recent studies show that aminoamide and fatty acid-based surfactants offer superior thermal stability, reduced adsorption, and improved salinity tolerance compared to conventional petroleum sulfonates (Yan et al. 2024; Tackie-Otoo et al. 2022). Molecular modification of hydrophilic-lipophilic balance (HLB) also strongly affects micelle behavior and boosts EOR performance (Kamal 2016; Olajire 2014). This study will use EOR, IFT, CMC, and HLB as abbreviations throughout the remainder of the paper. We combined cotton oil fatty acids and hexamethylenediamine to synthesize a new nonionic surfactant for EOR. We reacted cotton oil triglycerides with hexamethylenediamine at 120°C for 15 hours, using a 1:3.2 molar ratio. The product showed partial solubility in water and excellent solubility in ethanol, acetone, and ethyl acetate, appearing as a light brown, paste-like substance. Fourier-transform infrared spectroscopy confirmed the synthesis and revealed characteristic absorption bands. These bands include the carbon-hydrogen stretching of methyl and methylene groups at 2920.14 cm−1 and 2852.11 cm−1, the carbonyl stretching of the amide bond at 1632.53 cm−1, the carbon-nitrogen stretching at 1232.83 cm−1 and 1216.62 cm−1, the carbon-oxygen stretching of hydroxyl groups at 1041.86 cm−1, and the rocking vibrations of long methylene chains at 722.77 cm−1. Surface activity studies show that the surfactant substantially reduces air-water surface tension. At 0.5% concentration, surface tension drops sharply from 70.24 mN/m to 32.62 mN/m. The critical micelle concentration (CMC) falls within the range of 0.02–0.1% based on surface tension measurements. Conductivity measurements show no significant change in specific conductivity with increasing surfactant concentration, confirming the nonionic character of the compound. We assessed EOR potential using simulated core-flood experiments with a sandpack model. The sandpack, with a pore volume of 100 cm3, has a permeability of 500 mD. We set initial oil saturation at 65% of pore volume. Waterflooding recovered only 53.8% of the original oil, leaving a residual oil saturation of 30%. Injection of 0.5% surfactant solution mobilized additional trapped oil, forming a distinct oil bank. This surfactant injection recovered an additional 24.6% of the original oil, achieving 78.4% total oil recovery. Pressure monitoring revealed only a slight rise during oil-bank production, indicating no permanent formation damage, while visual inspection confirmed emulsion formation during oil mobilization. These results indicate that the cotton oil-derived aminoamide surfactant demonstrates superior surface activity and considerable potential for EOR applications. The nonionic nature of the surfactant offers advantages for high-salinity reservoir conditions. Because the product uses plant-based raw materials, it is more sustainable and economically beneficial. Further optimization of concentration and HLB through propoxylation may enhance performance for specific crude oil and reservoir conditions.