Oct 2026· Materials Testing· 0 citations· 32 references
Abstract
Abstract In this study, in order to examine the impact of heat treatment (diffusion annealing) on the microstructure, hardness, wear, and corrosion behavior, electrogalvanized DC01 steel was diffusion-annealed at 500, 550, and 600 °C. While hardness, tribological, and corrosion properties were assessed using microhardness measurements, reciprocating wear tests, and potentiodynamic polarization tests, respectively, microstructural analyses were carried out using SEM, EDS, and XRD. By encouraging the creation of Fe–Zn intermetallic phases at the interface and a ZnO-rich oxide layer on the surface, diffusion annealing changed the Zn coating and gradually increased its hardness. Wear resistance peaked at 500 °C and declined at higher temperatures, despite hardness increasing monotonically with annealing temperature. The decreased wear rate following annealing was attributed to the combined effects of intermetallic strengthening and the solid-lubricating nature of ZnO. Corrosion resistance was similar to that of the as-coated condition in the sample annealed at 550 °C, indicating a more consistent and stable surface. There was no further improvement when the temperature was raised to 600 °C. There is a temperature-dependent trade-off between these characteristics, with 550 °C providing the most stable corrosion behavior while 500 °C is ideal for maximizing wear resistance.
Relationships among processing, microstructure, and properties of Cr12Mo1V1Co steel under various quenching and tempering conditions were systematically investigated, with particular emphasis on tribological behavior. The microstructural evolution during heat treatment was characterized by optical microscopy, scanning...
This study investigated the effect of deep cryogenic treatment (DCT) duration on the microstructure, hardness, and wear resistance of two experimental H13 hot‐work die steels with different chemical compositions. The steels were quenched, subjected to DCT at –196 °C for 10, 20, and 30 h, and subsequently double tempere...
Hai-Feng Cao, Bin Zhang, Zhen-Liang Gao et al.· Steel Research International· 0 citations
In this research, AZ91 magnesium alloy was subjected to solutionizing at 410 °C for different soaking times (4, 8, 16, and 24 h), and the microstructure evolution, phase change, and mechanical and corrosion properties were investigated. From the microstructural studies, it was clearly observed that the intermetallic ph...
Rajasekhara Babu Kankanala, A. K. Lakshminarayanan, R. Buradagunta· Applied Engineering Letters...· 0 citations
Iron-based alloys with compositions Fe3CWNi, Fe3C10WCo, and Fe3CWNiCo were synthesized by solid-state sintering at 1400 °C. This study investigates how additions of nickel (Ni), cobalt (Co), and tungsten (W) enhance the microstructure, wear resistance, and corrosion behavior of the prepared alloys. Microstructural char...
Lahcene Mebarki, L. Baroura, Kamel Fedaoui et al.· International Journal of Eng...· 0 citations