Automated Harmonic Torque Injection to Reduce Speed Oscillations in Electrical Drive Trains
Abstract
Speed oscillations in an electrical drive train can have a negative impact on the driven mechanical load, and in some cases, can result in component damage. These oscillations are caused by an alternating torque that repetitively accelerates and decelerates the mechanical components. Angular-periodic torque oscillations resulting from a non-sinusoidal machine current can be addressed by an angle-triggered repetitive controller in parallel to the conventional current controller. Disturbances originating outside the current control loop are not mitigated by such a controller. This paper consequently proposes a method to determine and inject an additional reference torque, with the objective to mitigate angular-periodic speed oscillations. The method is based on existing signal identification approaches, combined with a phase compensation resulting from a detailed stability analysis. No additional system information is required. Experimental results demonstrate an automated reduction of the $\mathbf{6 0}^{\text{th}}$-harmonic speed oscillation by more than -22 dB in two representative operating points.