Research on Pressure Fluctuation and Vortex Evolution Characteristics in Pump-Turbine Under Load-Rejection Condition

Abstract

During load rejection in pumped-storage power stations, the rotational speed of the pump-turbine increases abruptly. The consequent structural deterioration of the internal flow induces high-amplitude hydraulic excitations, posing a serious threat to the operational stability of the unit. This study investigates a Francis pump-turbine to elucidate its flow evolution and instability mechanisms during load rejection. The fluid is modeled as weakly compressible water to capture finite pressure wave propagation. Dynamic mesh simulates guide vane closure, while vortex identification and short-time Fourier transform analyze transient pressure pulsations. The results indicate that the transient process can be sequentially divided into four typical stages—turbine mode, turbine-braking mode, reverse-pump mode, and return-to-turbine mode—to account for the most critical periods during the load rejection transient. The unit exhibits the poorest stability near the maximum rotational speed (443.34 r/min), where flow reversal and the full development of vortex structures significantly amplify fluctuations in hydraulic thrust. The vaneless space is identified as the primary source of pressure pulsations, whose characteristics are dominated by rotor–stator interaction mechanisms, and such disturbances decay rapidly in the downstream direction. Under turbine-braking and reverse-pump conditions, vortex rings, backflow, and asymmetric vortex structures generated within the spiral casing collectively contribute to the severe deterioration of the internal flow field quality.