EXPERIMENTAL INVESTIGATION FOR IMPROVING THE PRODUCTIVITY, HOLE GEOMETRY AND MACHINED SURFACE IN EDM DRILLING OF Ti-6Al-4V USING DESIRABILITY FUNCTION APPROACH (DFA)
Oct 2026· Surface review and letters· 0 citations· 20 references
Abstract
Improving and controlling the quality of miniature holes is a very challenging task. It is more difficult when Ti-alloys are used for the fabrication of aerial components due to their exceptional mechanical properties and strength. Moreover, they are chemically reactive with all tool materials in conventional machining. Hence, electrical discharge drilling (EDD) is the preferred choice to produce high-aspect ratio holes in these alloys. The behavior of the EDD process is complex, owing to spark erosion phenomenon. In the present study, an integration of Box–Behnken design (BBD) and desirability function approach (DFA) has been employed to optimize the productivity, hole geometry and resolidified layer during EDD of Ti-6Al-4V. These performance characteristics are quantified in terms of metal removal rate (MRR), hole taper (HT) and recast layer thickness (RLT). The influences of process variables (discharge current, pulse on and off time, dielectric pressure) on these responses have been analyzed using the response surface models. The application of DFA has reduced HT and RLT by 69.23% and 36.83%, respectively, and MRR is enhanced by 62.54%. The approach can also be used to optimize the other machining surface parameters significantly.
Drilling is an important machining process for producing accurate holes in engineering components, where hole quality and dimensional accuracy directly influence assembly and functional performance. Therefore, understanding the effects of drilling parameters on machining performance, surface integrity, and hole geometr...
S. K. Rajbongshi, Biplab Das, Nayam Ahmed· Engineering Research Express· 0 citations
Wire Electric Discharge Machining (WEDM) is a precise machining method widely used for cutting intricate geometries in conductive materials. The present study investigates taper WEDM cutting of Al-SiC-ZrO2 composite material using three input parameters such as taper angle (TA), pulse-on time (TON), and peak current (I...
B. Lodhi, Dharmin M. Patel, Pradip V. Savalia et al.· International Journal of Mar...· 0 citations
ABSTRACT The need for metals and their alloys capable of functioning in severe environmental conditions caused by repeated mechanical stresses and intense wear has resulted in the creation of Inconel alloys. Among these, Inconel 625 stands out as a significant superalloy that exhibits outstanding resistance to wear, co...
R. Rajasekaran, Baskar Neelakandan, Rajesh Pinnavasal Venukrishnan et al.· Matéria· 0 citations
Titanium alloys are distinguished by their exceptionally high strength-to-weight ratio, which is unaffected by the hightemperatures at which they are used. Because of this property, they are suitable for a wide range of different marineapplications. Titanium alloys have an exceptionally high corrosion resistance. The d...
Rishabh Chaturvedi· International Journal of Mar...· 0 citations
Electrical Discharge Machining (EDM) is a high-precision, non-conventional machining process widely used to produce intricate geometries in biomedical and aerospace components. It is particularly effective for fabricating micro-holes, complex shapes, and achieving high dimensional accuracy in difficult-to-machine mater...
B. Lodhi, Rohit Sahu, V. D. Golakiya et al.· International Journal of Mar...· 0 citations
We use cookies to run the site and, with your consent, for analytics and to show ads.
See our Cookie Policy.