Development of Mxene-Reinforced AA5083 H111 Marine Aluminium Composites: Experimental Investigation, Hollomon Constitutive Modeling and Finite Element Validation Introduction
Oct 2026· International Journal of Maritime Engineering· Vol 168, pp. 25-32· 0 citations
Abstract
Response Surface Methodology (RSM) was used to optimally manufacture AA2024–TiC nanocomposites using stircasting and Box–Behnken design to enhance the mechanical properties for marine structural applications. The selected process variables included TiC content (2–8 wt.%), stirring speed, time, and melt temperature. The results show that TiC content is a significant factor affecting mechanical behavior, with optimal performance at approximately 5 wt.% due to uniform dispersion and effective load transfer. Optimization conditions yielded maximum tensile strength (~398 MPa) and hardness (~144 HV), while elongation decreased with increasing reinforcement due to brittleness and particle clustering. ANOVA confirmed the significance of quadratic models with high prediction accuracy (R2 > 0.96). Optimal processing conditions were identified as ~580 rpm, ~11 min, and ~748 °C, and were validated through confirmation tests within a 95% confidence interval. The developed nanocomposites exhibit improved strength–ductility balance, making them suitable for lightweight marine load-bearing structures.
Response Surface Methodology (RSM) was used to optimally manufacture AA2024–TiC nanocomposites using stircasting and Box–Behnken design to enhance the mechanical properties for marine structural applications. The selected process variables included TiC content (2–8 wt.%), stirring speed, time, and melt temperature. The...
A. Saxena, G. Sandeep, Y. D. Jadhav et al.· International Journal of Mar...· 0 citations
This study investigates chemically modified and untreated cassava peel particulates in epoxy composites using Response Surface Methodology (RSM) for systematic optimisation. Composites with varying weight fractions (2–8 wt.%) of treated and untreated cassava peel were fabricated and tested for mechanical and wear prope...
A. D. Atowon, O. Inah, Emmanuel Akomaya Ugbong et al.· International journal of re...· 0 citations
This study experimentally investigates the mechanical properties and development patterns of mortars incorporating steel slag (SS), coal gangue (CG), and biochar (BC) and establishes a multi-objective optimization framework for sustainable mix design. The investigation systematically evaluates the individual effects of...
Jia-Yuan Xu, Xun-Jiao Zhan, Wei Wang et al.· Materials· 0 citations