Skip to content

Reactive Compatibilization of Bio-Based PLA/PEF Blends for Recoverable 4D-Printed Architectures

Oct 2026 · ACS Sustainable Chemistry & Engineering · 0 citations · 37 references

Abstract

Fused deposition modeling (FDM) of shape-memory polylactic acid (PLA) offers opportunities for thermally responsive architectures, but its brittleness limits structural applications. Here, predominantly bio-based PLA/poly(ethylene furanoate) (PEF) blends were developed using a multifunctional epoxy-based chain extender (ADR) for reactive compatibilization. Molecular dynamics simulations and scanning electron microscopy indicated limited thermodynamic compatibility and interfacial defects in uncompatibilized blends. Adding 0.1–0.3 wt % ADR to a PLA/PEF blend with polymer mass ration of 90/10 refined the dispersed morphology and increased low-frequency melt elasticity, consistent with improved interfacial coupling. The characteristic PEF-domain diameter decreased from 0.55 to 0.20 μm. The blend containing 0.1 wt % ADR produced an elongation at break of 10.8%. ADR increase the shape recovery ratio of bent specimens from 73.7% to 87.0%. Gyroid and Diamond triply periodic minimal surface architectures printed from the blend containing 0.1 wt % ADR exhibited sustained compressive load-bearing behavior and recovery ratios of 92.13% and 89.25%, respectively. These findings demonstrate a predominantly bio-based material approach for recoverable 4D-printed architectures, which highlight the potential in thermally-responsive engineering architectures including deployable energy absorbers and biomedical components.

View source

We use cookies to run the site and, with your consent, for analytics and to show ads. See our Cookie Policy.