Skip to content

Development and Performance Evaluation of a Temperature Intelligent Response Reservoir Protection Drilling Fluid System for Deep-Sea Natural Gas Hydrates

Sep 2026 · GOTECH · 0 citations · 22 references

Abstract

Deep-sea natural gas hydrate reservoirs are characterized by complex temperature–pressure conditions and weak formation cementation, which makes it difficult for existing water-based drilling fluids to simultaneously ensure wellbore stability and reservoir protection under deep-sea drilling conditions. To address this challenge, this study develops a water-based drilling fluid system integrating efficient hydrate inhibition, temperature-responsive reversible plugging, and low-temperature rheology control, aiming to achieve drilling-stage plugging for maintaining wellbore stability and production-stage unplugging for permeability recovery and effective reservoir protection. Addressing deep-sea natural gas hydrate operating conditions and engineering constraints, mixed salts, monoethylene glycol, and inhibitor SYZ-2 are employed to provide coupled thermodynamic and kinetic hydrate suppression. Meanwhile, a thermosensitive temporary plugging agent NP-1 combined with plugging anti-sloughing agent PF-PA is used to construct a nano–micro–macro reversible plugging network, in which temperature-triggered adsorption, desorption, and phase reversibility enable adaptive wellbore sealing during drilling and automatic unplugging during production. In addition, PF-XC and PF-CA are introduced to regulate low-temperature rheological behavior of the drilling fluid system. Single-additive optimization is conducted to determine additive dosages and compatibility, followed by systematic laboratory evaluations including rheology tests at 4 °C and 25 °C, fluid loss, lubricity, linear swelling, sand-bed plugging, and core plugging–unplugging experiments. Furthermore, hydrate inhibition performance is verified in a high-pressure autoclave at 2 °C and 15 MPa. The results demonstrate that the drilling fluid exhibits excellent low-temperature rheological stability and shear recovery, with apparent viscosity maintained at 35–37 mPa·s, API fluid loss below 5 mL, and a friction coefficient of 0.083. The sand-bed plugging efficiency reaches 86.5%, while core flooding tests show a permeability recovery of 60.1% after cold-water backflow, confirming the temperature-responsive reversible unplugging behavior of the multiscale plugging structure. The linear swelling inhibition rate exceeds 80%, indicating effective suppression of clay hydration. In the high-pressure autoclave, hydrate formation is continuously inhibited for more than 40 h. Overall, these results indicate that the proposed drilling fluid system realizes intelligent triple synergy of inhibition, plugging, and rheological control, effectively maintaining wellbore stability while reducing reservoir damage, and thus shows strong potential for safe and efficient drilling in deep-sea natural gas hydrate reservoirs.

View source

Similar papers

Open access Oct 2026

Dynamic Coupling Mechanisms and Collapse Risk Mitigation in Gas Hydrate-Bearing Reservoirs: A THMC Framework for Safe Deepwater Drilling

Natural gas hydrate (NGH) has emerged as a strategic alternative energy resource for the 21st century, with the South China Sea containing substantial reserves estimated at 80 billion tons of oil equivalent, 2.5 times those found in terrestrial permafrost regions. However, its exploitation faces critical wellbore sta...

Jing Li, Kai-Xiang Shen, Bin Li et al. · 0 citations
Review Open access Sep 2026

A Review of Drilling-Induced Risks in Gas Hydrate-Bearing Formations: Mechanisms, Control Strategies, and Numerical Models

Gas hydrate-bearing formations are characterized by low temperature and high pressure, weak cementation, strong phase sensitivity, and pronounced heterogeneity. During drilling in such formations, the drilling fluid is required to maintain wellbore stability, transport cuttings, and control bottom-hole pressure; howeve...

Lian Wang, Jie-Cheng Zhang, Zi-Zheng An et al. · 0 citations
Conference Oct 2026

Ultra-High Temperature Resistant and Environmentally Friendly Polymer Water-Based Drilling Fluid: Development, Performance Evaluation, and Field Application

Global oil and gas exploration is increasingly moving towards deeper formations. However, under the complex and harsh conditions of ultra-high temperature, high pressure, and salt-gypsum layers, the performance of conventional water-based drilling fluids deteriorates significantly, leading to frequent drilling incide...

Yuan-Wei Sun, Jin-Sheng Sun, Kai-He Lv et al. · 0 citations
Open access Oct 2026

Numerical Evaluation of Natural Gas Flooding Potential in a Deep Sandstone Reservoir Integrated with Phase Behavior

Deep sandstone reservoirs typically exhibit complex geological characteristics, including high temperature, high pressure, and high salinity. These reservoirs are predominantly developed using a wide well spacing strategy under natural depletion and water flooding, and no mature tertiary recovery technique has yet been...

Jin-Ju Liu, Li-Wu Jiang, Tong-Jing Liu et al. · 0 citations
Conference Oct 2026

Development and Field Application of a Novel Ultra-High Temperature Seawater-Based Fracturing Fluid System for Deep Offshore Reservoirs

Deep offshore hydrocarbon reservoirs are commonly characterized by ultra-high bottomhole temperatures exceeding 180°C and severe freshwater shortages, posing substantial technical challenges to conventional hydraulic fracturing operations. Traditional freshwater-based fracturing fluids fail to adapt to high-temperatu...

Yong-Gang Xie, Qiang Ma, Ting Jin et al. · 0 citations

We use cookies to run the site and, with your consent, for analytics and to show ads. See our Cookie Policy.