The presence of iron(II) impurities hinders the leaching and purification of magnesium ores. The most viable technological solution is to oxidise Fe2+ to Fe3+, which then precipitates as goethite. However, this process requires the development of new catalysts for use in highly acidic media. This study demonstrates that the Pt0.25/CeO25/TiO2 catalyst is highly effective at oxidising Fe2+ in 0.3 M HNO3, outperforming samples supported on pure titanium dioxide or cerium dioxide. The rate constant is 0.304 L/(mol·min) at room temperature. Notably, the activation energy is only 10.7 kJ/mol, which is over five times lower than that of the non-catalytic process. This result was achieved by selectively depositing platinum particles onto highly dispersed cerium dioxide particles (average size ~5 nm), synthesised using the sol–gel method, and then depositing them onto titanium dioxide. Using a hybrid mixed oxide support ensures a high density of oxygen vacancies at the interface between the platinum (Pt) and mixed cerium and titanium dioxide phases. The formation of abundant adsorbed oxygen species enhances the catalytic activity of the Pt0.25/CeO25/TiO2 catalyst. The catalyst Pt0.25/CeO25/TiO2 also reaches a plateau in terms of efficiency after a durability experiment, which is the highest among the other samples.
Platinum on carbon remains the proton-exchange membrane fuel cell cathode state-of-the-art catalyst; however, durability losses tied to support corrosion and Pt coarsening hinder this catalyst. This study investigates utilizing different variations of Vulcan XC-72 and Ti3C2 MXene to improve the oxygen-reduction ORR act...
M. Görüryilmaz, Bastian Schmiedecke, A. Emerenciano et al.· Journal of the American Chem...· 0 citations
Electron transport, electrolyte accessibility, and structural stability are three key factors that influence hydrogen evolution reaction (HER) activity and catalyst durability. In this study, a coal gasification slag waste-derived carbon–silica (C@SiO2) support was used to prepare Ni-based HER electrocatalysts. The c...
Tehreem Ayaz, M. Habib, Muhammad Javed et al.· Energy & Fuels· 0 citations
Ammonia borane (AB) is an ideal chemical hydrogen storage material owing to its high gravimetric and volumetric hydrogen capacities. However, the practical application through hydrolysis calls for catalysts that are efficient, stable, and low-cost. In this work, a CoxC/TiO2 catalyst was synthesized by pyrolyzing a Co-M...
This study presents an innovative ternary non-noble metal oxide/sulfide composite electrocatalyst, (Mn,V)4O7−x/Fe3S4−y, designed to enhance the efficiency and selectivity of the ambient-condition electrochemical nitrogen reduction reaction (N2RR). Synthesized on nickel foam via a hydrothermal method, this multidefect...
Kefyalew Hailemariam Woldeamanuel, T. Eshetu, Meselu Eskezia Ayalew et al.· ACS Sustainable Chemistry &a...· 0 citations
To develop low-cost, high-performance catalysts for low-temperature carbon monoxide (CO) oxidation, a low-crystallinity calcite-type CaCO3 support was prepared by calcining calcium citrate at 500 °C. Pd based catalysts with Pd loadings of 0.2–2 wt.% over the obtained CaCO3 supports were synthesized via excess impregnat...