Skip to content
Open access

Finite element analysis and experimental validation of a steel rubber automotive endstop damper

Oct 2026 · Discover Mechanical Engineering · Vol 5 · 0 citations · 23 references

Abstract

Rubber materials are widely used in the automotive industry due to their shock-absorbing properties, which are also utilized in steering systems to avoid high-rate compression loads at end-of-travel positions. This study presents a finite element analysis of a steel-rubber automotive endstop damper, with particular attention to the material properties of the rubber, the contact surfaces, and the tilting effect resulting from tolerances. During the study, three rubber grades (NBR80, NBR85 and HNBR80) were compared, using the Yeoh hyperelastic model combined with the Prony series-based linear viscoelastic model to capture mechanical behavior. During the nonlinear finite element analysis, the force-displacement characteristics, strain distribution, and energies were determined. Mesh and friction sensitivity analyses were also performed to evaluate the influence of the numerical settings. The numerical force-displacement responses were compared with the first experimental loading branches of the investigated NBR80 Ø42 configurations, with and without tilting, up to 31 kN. The individual loading curves showed reasonable agreement, while the tilting-induced displacement difference was not quantitatively validated. Within the investigated loading conditions, the model can be used for comparing the investigated steering system endstop damper design variants, reducing the need for physical prototypes.

Read PDF

We use cookies to run the site and, with your consent, for analytics and to show ads. See our Cookie Policy.