Introduction Biofouling is a serious problem in various industrial sectors such as shipping infrastructure, cooling water systems, and aquaculture. Biofilm formation by different types of microorganisms plays a very crucial role in this biofouling process. Biofouling on metallic surfaces accelerates aggressive corrosion processes. Therefore, it is essential to develop antifouling coatings with corrosion resistance for effective protection. Methods In the present study, copper sorbate (CS) and copper oxide (CuO) were synthesized as antifouling pigments and characterized using a UV-vis spectrometer, Fourier transform infrared spectroscopy, X-ray diffraction, and field emission scanning electron microscopy. Both pigments in different ratios were used for the formulation of antifouling and anti-corrosion paints. Salt spray test and anti-corrosion test were performed in the presence of 3.5% NaCl solution for 30 days. Electrochemical impedance spectroscopy (EIS) and potentiodynamic polarization were recorded for all the tested specimens. Results and Discussion The results indicate that CS-rich coatings (15%20% of CS) display higher corrosion resistance than CuO-rich coatings. The antifouling potential of the coated mild steel was evaluated by immersing them in the marine estuarine water, and surface changes were monitored at regular intervals. All coatings exhibited considerable antifouling effects up to 60 days of immersion. Notably, the CS-II coating, containing only 5% CuO with 15% of CS, showed significant fouling resistance up to 90 days. At the end of 120 days, SEM analysis confirmed that a huge number of marine microorganisms (mostly diatoms) settled on CS-I, CS-III, CS-IV, and CS-V, but minimal microorganisms were only noticed on CS-II. This could be due to the antimicrobial activity and controlled leaching behavior of both pigments in marine conditions.
Corrosion of metallic materials in aggressive environments remains a major challenge affecting the durability of industrial structures and equipment. In this context, protective coatings based on natural materials have attracted increasing attention as sustainable alternatives to conventional anticorrosive systems. Thi...
C. Ruiz-Sánchez, Priscila Anahi Suntaxi-Suntasig, C. Donoso et al.· Polymers· 0 citations
The development of sustainable anti-corrosive paints is crucial for protecting metal surfaces, especially in harsh environments where durability and environmental safety are essential. This project was conceived to produce efficient and environmentally responsible anti-corrosive paints based on iron(III) oxide (Fe2O3)...
Agostinho Ferreira, Danielle Machado de Oliveira, João Vitor Soares Gomes et al.· Química Nova· 0 citations
Zirconium-based conversion coatings were prepared on unpolished ST20LS mild steel by conventional immersion and cathodic polarization in aqueous H2ZrF6 solutions. Five-factor experimental designs were used to examine the effects of pH, temperature, deposition time, H2ZrF6 concentration, drying temperature/applied catho...
O. Kholkin, S. Oparin, N. Ivanova et al.· Coatings· 0 citations
Ensuring the long-term operation of structural materials in heterophase oil and gas environments requires the development of effective, environmentally safe methods of anti-corrosion protection. The work aims to study the anti-corrosion efficiency and electrochemical behavior of new modified inhibitors based on higher...
O. Romanchuk, Petro Topilnytskyy, V. Romanchuk· Chemistry & Chemical Tec...· 0 citations